I haven't been on the forums in awhile. Since fall is closing in the urge to make sawdust is growing stronger. Here's a cabinet I built for my SPT's last fall. It features pull out shelves for easy loading and unloading and adjustable heights via a tenon ladder system. See photos for details. It's all birch plywood from the Orange Box store and the ladder system is from reclaimed pallet wood (I think hickory). I have some more stuff to share later on; stay tuned!
Craig
2015-08-18 19.55.00.jpg (76.17 KiB) Viewed 8233 times
2015-08-18 19.55.24.jpg (99.99 KiB) Viewed 8233 times
2015-08-18 19.56.40.jpg (75.43 KiB) Viewed 8233 times
2015-08-19 10.15.00.jpg (80.27 KiB) Viewed 8233 times
The next time you think your idea is stupid, remember someone in a meeting once said, "let's make a movie about tornadoes full of sharks!"
crosscreekcraig wrote:Thanks! I got the idea from a Woodsmith video tip for doing the same thing for kitchen cabinets.
so how can you adjust the shelf height with the shelf attached to the slide?
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
The slides come apart. Just pull a little lever on each side and they release when you pull them all the way out. One half of the slide remains with the shelf and the other half on the "ladder step" (for lack of a better term). Gotta remove the tool from the shelf first of course.
crosscreekcraig wrote:The slides come apart. Just pull a little lever on each side and they release when you pull them all the way out. One half of the slide remains with the shelf and the other half on the "ladder step" (for lack of a better term). Gotta remove the tool from the shelf first of course.
Da I use the same ones, just bought a pair to day for my Router cabinet/table drawer I made this week. Not been doing enough WW the last 10 months. I got it pull out, unleash the lever, pull out, move the other sides to a new position, slide back in. NICE!!!
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
That is absolutely outstanding! Love the design. The jointer is too low for this old guy , but great idea and well executed!
Dick 1965 Mark VII S/N 407684
1951 10 ER S/N ER 44570 -- Reborn 9/16/14
1950 10 ER S/N ER 33479 Reborn July 2016
1950 10 ER S/N ER 39671
1951 jigsaw X 2
1951 !0 ER #3 in rebuild
500, Jointer, Bsaw, Bsander, Planer
2014 Mark 7 W/Lift assist - 14 4" Jointer - DC3300
And a plethora of small stuff .....
"The trouble with quotes on the Internet is that you can never know if they are genuine." - Benjamin Franklin
rjent wrote:That is absolutely outstanding! Love the design. The jointer is too low for this old guy , but great idea and well executed!
I put the jointer around waist height for me (I'm 6 feet), so I don't have to stoop to pick it up or raise my arms too high to lift it off the shelf safely. It works out. I also have a Mark V mounted planer that I kept on a bench. I finally found a guy parting out a Pro Planer on Ebay and bought the drive motor and stand then ordered the upgrade high speed pulleys and SPT casters from SS (still waiting for those); now I don't have to lug that heavy, awkward thing any more.
Great job on the cabinet. I need to make one, but I know I will not get to it soon. Too much stuff in my way! Did you need to secure it to the wall to keep it from tipping when you pull out the jointer?
Chris Neilan
Shopsmith Mark 7, Shopsmith Mark V 1982, shortened, Shopsmith 10 ER; Craftsman table saw (1964); Powermatic 3520B lathe
I use the same ones, just bought a pair to day for my Router cabinet/table drawer I made this week. Not been doing enough WW the last 10 months. I got it pull out, unleash the lever, pull out, move the other sides to a new position, slide back in. NICE!!!
