easily made, a comfortable fit.
I needed a handle for the blade so went online and found pictures of many models. Selected one that looked right for this blade and downloaded it. Then I adjusted the size to what I thought was right and printed it. That was my pattern. No sense in being creative when those engineers have already solved the design problem for me. I used the 1"x1" drum sander to finish it. Put some of that sticky sandpaper I got at the Dollartree (see Community). I have enough left to make 27 more - not bad for a buck.
Not Pretty But. . .
Moderator: admin
Not Pretty But. . .
- Attachments
-
- P1090802.JPG (57.79 KiB) Viewed 12220 times
-
- P1090798.JPG (70.05 KiB) Viewed 12220 times
Re: Not Pretty But. . .
Nice work on the handle.
Didn't know about that sticky sand paper. Great idea. Gotta look around next time I'm in that store.
Didn't know about that sticky sand paper. Great idea. Gotta look around next time I'm in that store.
-
rjent
- Platinum Member
- Posts: 2121
- Joined: Fri Mar 14, 2014 3:00 pm
- Location: Hot Springs, New Mexico
Re: Not Pretty But. . .
That is a piece of work. Nice handle. I have a saw very similar to that that the handle is bad .... 
Thanks for the idea!
Thanks for the idea!
Dick
1965 Mark VII S/N 407684
1951 10 ER S/N ER 44570 -- Reborn 9/16/14
1950 10 ER S/N ER 33479 Reborn July 2016
1950 10 ER S/N ER 39671
1951 jigsaw X 2
1951 !0 ER #3 in rebuild
500, Jointer, Bsaw, Bsander, Planer
2014 Mark 7 W/Lift assist - 14 4" Jointer - DC3300
And a plethora of small stuff .....
"The trouble with quotes on the Internet is that you can never know if they are genuine." - Benjamin Franklin
1965 Mark VII S/N 407684
1951 10 ER S/N ER 44570 -- Reborn 9/16/14
1950 10 ER S/N ER 33479 Reborn July 2016
1950 10 ER S/N ER 39671
1951 jigsaw X 2
1951 !0 ER #3 in rebuild
500, Jointer, Bsaw, Bsander, Planer
2014 Mark 7 W/Lift assist - 14 4" Jointer - DC3300
And a plethora of small stuff .....
"The trouble with quotes on the Internet is that you can never know if they are genuine." - Benjamin Franklin
Re: Not Pretty But. . .
Although your thread title says Not Pretty - I think that is a real handsome handle. NICE WORK!!
Octogenarian's have an earned right to be a curmudgeon.
Chuck in Lancaster, CA
Chuck in Lancaster, CA
-
ERLover
- Platinum Member
- Posts: 3914
- Joined: Mon Aug 31, 2015 10:19 pm
- Location: Greenie and Goldie Country not to metion the WI Badgers!
Re: Not Pretty But. . .
Looks pretty to me, and almost original, with a bit of distress added to it, it would be original 
I like the hook for the little finger.
I like the hook for the little finger.KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
Re: Not Pretty But. . .
That is a very nice looking handle. If it's still raw wood, a nice finish would add even more to it... Great job!!!!!!!!!!
Mike
Mike
-
JPG
- Platinum Member
- Posts: 35457
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Not Pretty But. . .
'Finishing' tool handles is a 'good' way to create blisters,oldiron wrote:That is a very nice looking handle. If it's still raw wood, a nice finish would add even more to it... Great job!!!!!!!!!!
Mike
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
-
robinson46176
- Platinum Member
- Posts: 4182
- Joined: Mon Mar 09, 2009 9:00 pm
- Location: Central Indiana (Shelbyville)
Re: Not Pretty But. . .
Isn't that "sticky back" sandpaper the stuff normally sold as non-slip material for steps and such places?
I never really thought about sanding with it, I'll have to get some and check it out. Anything that works.
Nice handle...
.
I never really thought about sanding with it, I'll have to get some and check it out. Anything that works.
Nice handle...
.
--
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
-
swampgator
- Platinum Member
- Posts: 1256
- Joined: Fri Nov 27, 2009 9:32 pm
- Location: Pensacola, FL
Re: Not Pretty But. . .
Really nice handle. Thanks for posting so we can see your craftsmanship.
Steve, the old swampgator
Steve, the old swampgator