Instructions for replacing the infeed/outfeed rollers?

[Sazerac81]

Does anyone have instructions for replacing the rollers on the shopsmith planers?

Is it simply loosening and removing the tension arms and pulling the whole assembly out or do I need to completely breakdown the two sides of the planer to accomplish removal/replacement of the infeed/outfeed rollers?

I have another knurled roller on hand that I would like to exchange for the current knurled roller to see if it helps fix my slight planer drift issue. Yes, it is still driving me a tad bit crazy even though planing performance is spot on.... I just don't like it when the manual states it should work this way and it doesn't work as specified in the manual.

Cheers,
John

[Sazerac81]

If no official instructions, can anyone tell me if I need to take one side off to replace the infeed/outfeed roller?

[JPG]

If no official instructions, can anyone tell me if I need to take one side off to replace the infeed/outfeed roller?

Short answer - yes.

Will scan the instruction later today - finally found them.

[Sazerac81]

If no official instructions, can anyone tell me if I need to take one side off to replace the infeed/outfeed roller?

Short answer - yes.

Will scan the instruction later today - finally found them.

Darn.

Thanks for the instructions!

Cheers,
John

[JPG]

PDF File too big to attach

PM your e-mail address

[RickZ43]

If anyone has access to these instructions, I'd like to get a copy.

[chapmanruss]

Copies of the Manuals for Shopsmith Tools including the Mark Mount and Pro Planers can be purchased from Shopsmith at the link below.

https://www.shopsmith.com/ownersite/cat ... sindex.htm