Toy Making

[rlkeeney]

I like making toys. It doesn't cost much in materials to make them and they can be a real challenge to make good quality toys that look good and are durable.

Here is one of mine made of reclaimed poplar.

20161126-083139-Etsy Wood Play Pal Pickup Truck - Poplar - Brushed Satin Polyurethane.jpg (147 KiB) Viewed 14099 times

[charlese]

I also use poplar. Having made a thousand or so little cars and trucks, I find my production cost (minus electricity and shop heating) to be close to $1.50 Each.

[wa2crk]

Made a bunch of these for toys for tots and for the grandsons a few years ago

S6300160.JPG (278.53 KiB) Viewed 14069 times

S6300177.JPG (282.46 KiB) Viewed 14069 times

Been doing these every year since for Toys for Tots

bear playing football.jpg (78.88 KiB) Viewed 14069 times

Bill V

[rlkeeney]

I made several of these doll cradles as Christmas gifts many years ago. It's sitting on what was my work bench.

Doll Cradle

00004027-1987-searsksx-Doll Cradle.jpg (144.71 KiB) Viewed 14066 times

[rlkeeney]

I built this little car while experimenting with Home Depot oops paint and an airbrush. It has a nice satin finish but the wood grain is raised just enough so it;s obviously made from wood. Everyone who has seen it up close really likes to finish.

I also figured out how to get the axle ends painted and have it look right to me.

VW Bug Painted with Opps paint from Home Depot.

20161125-170634-Etsy Wooden Car VW Bug Pine Pink.jpg (117.51 KiB) Viewed 14063 times

[rlkeeney]

I just finished this little beastie a few days ago. All done with a scrollsaw , drill press and lots of sanding. It's made from oak poplar and birch. The finish is brushed on amber shellac with a dab of metallic green craft paint on the axle hubs. I've made several of these using various techniques and believe me the little trucks are a lot of work. I broke several of them while drilling the holes and cutting windows. So far I haven't found a technique that doesn't require lots of sanding.

The only thing I haven't tried is making a pattern using a router with a pattern following bit. Seems like this is a ready made project for pin routing.

Mini Monster Truck

20161126-113532 - Toy Wood Monster Truck - Play Pal - Oak & Poplar - Hand Brushed Amber Shellac.jpg (145.82 KiB) Viewed 14035 times

[Mike907]

I like the racing stripe! Beautiful work on all of the toys.

Mike

[wrmnfzy]

Here are I made for kids in the family

[wrmnfzy]

Here are some I made for kids in the family

[rjent]

Made a bunch of these for toys for tots and for the grandsons a few years ago
S6300160.JPG
S6300177.JPG
Been doing these every year since for Toys for Tots
bear playing football.jpg
Bill V

I absolutely love that transport truck!

All of those are just beautiful. The rocking crib is perfect!