10ER guidance/videos

[ERLover]

JPG do your magic, pics I posted here with Skips big wheel on my er, cant find it on my computer or a search here.
do you magic!!!

[JPG]

JPG do your magic, pics I posted here with Skips big wheel on my er, cant find it on my computer or a search here.
do you magic!!!

http://www.shopsmith.com/ss_forum/viewt ... 65#p222365

[ERLover]

JPG you are the best!!! How did you find it??

[JPG]

JPG you are the best!!! How did you find it??

Started with your posts.

Search for 'skip'.

Browsed until I 'found' it.

[ERLover]

JPG you are the best!!! How did you find it??

Started with your posts.

Search for 'skip'.

Browsed until I 'found' it.

There are many good ones here, got to be PC correct, but you are one of the few and the proud.
Thank you
I hope are newbie ER person got something out of it.
I did a super favor for a newbie ER person here from NY State and have heard nothing here since.

[JPG]

JPG you are the best!!! How did you find it??

Started with your posts.

Search for 'skip'.

Browsed until I 'found' it.

There are many good ones here, got to be PC correct, but you are one of the few and the proud.
Thank you
I hope are newbie ER person got something out of it.
I did a super favor for a newbie ER person here from NY State and have heard nothing here since.

Maybe it got lost in the mail!!!!

[reible]

Speaking of brave or what.

When I first got the 10ER which I gave to my brother it needed a few things and I of course had to check it out to make sure everything was working and do a few repairs........

First time I set it up in drill press mode I noticed just how close my hair came to the pulley system. Maybe just lucky that I set it up with the headstock at the height or what?

When to ebay to find the guard, no way would I use it without or give it with out the guard.

Now if you have changed the pulley sizes the guard may not work but I personally think using things with exposed pulley systems is not a good idea so even a bent piece(s) of sheet metal would be in place on anything I used. Not worth loosing your hair and well other parts over.

Ed

[ERLover]

Speaking of brave or what.

When I first got the 10ER which I gave to my brother it needed a few things and I of course had to check it out to make sure everything was working and do a few repairs........

First time I set it up in drill press mode I noticed just how close my hair came to the pulley system. Maybe just lucky that I set it up with the headstock at the height or what?

When to ebay to find the guard, no way would I use it without or give it with out the guard.

Now if you have changed the pulley sizes the guard may not work but I personally think using things with exposed pulley systems is not a good idea so even a bent piece(s) of sheet metal would be in place on anything I used. Not worth loosing your hair and well other parts over.

Ed

Point taken

[fredsheldon]

Is that a Chambers range in the background

[bobgroh]

One very neat thing you can do with an ER is mount it on the wall and use it for a rather nice drill press! Don't have a picture of one setup like that but an old timer I know had done that with his ER. He also had a Mark V 510 (along with a nice batch of other stuff). I sold him my SS 4 inch jointer and, when he explained he was as 88 years old, I agreed to drive it out to his place about 25 miles from here. He gave me a tour of his house and showed the many pieces of nice furniture he had made over the years. That tour was well worth the trip!!