Recent Projects

This is a forum for intermediate to advanced woodworkers. Show off your projects or share your ideas.

Moderator: admin

User avatar
Skizzity
Gold Member
Posts: 482
Joined: Thu Feb 25, 2016 12:22 pm
Location: Colorado Springs

Recent Projects

Post by Skizzity »

My brother got me The Big Book of Weekend Woodworking for Christmas. Inside was a neat looking candle holder. It called for a 1/2" ball for the dowel topper. A couple years ago I was given a 4"x16"x1" piece of unknown wood to turn a new wood stove handle. Job complete. I found the cut off when looking at my wood and decided it would be a good choice. I then decided it would be a present for my friend with the wood stove.
candle holder 1.jpg
candle holder 1.jpg (493.54 KiB) Viewed 8712 times
candle holder 2.jpg
candle holder 2.jpg (432.58 KiB) Viewed 8712 times
The layout was actually fun. Instead of the ball topper I turned a topper from a cutoff. Fun, simple, neat project I think. My friend loves that it matches the wood stove handle.
PowerPro Mark 7, 11" Bandsaw, 4" Jointer, 12" Professional Planer, DC3300 Dust Collector, DW745, DW718 w/ DW723 and a DW788 w/ DW7880.
Success is not final, failure is not fatal: it is the courage to continue that counts. -Winston Churchill
User avatar
Skizzity
Gold Member
Posts: 482
Joined: Thu Feb 25, 2016 12:22 pm
Location: Colorado Springs

Re: Recent Projects

Post by Skizzity »

Design by Steve Ramsey

Utility stool
utility stool 1.jpg
utility stool 1.jpg (561.89 KiB) Viewed 8702 times
utility stool 2.jpg
utility stool 2.jpg (598.77 KiB) Viewed 8702 times
Fun learning project. Made from a single 2x4. After milling my stock was 1-5/16". Made adjustments and made it work. This should do well for my little shop. I can reach most of the ceiling with it.
PowerPro Mark 7, 11" Bandsaw, 4" Jointer, 12" Professional Planer, DC3300 Dust Collector, DW745, DW718 w/ DW723 and a DW788 w/ DW7880.
Success is not final, failure is not fatal: it is the courage to continue that counts. -Winston Churchill
Lodgepole
Gold Member
Posts: 286
Joined: Tue Oct 17, 2006 7:21 pm
Location: Idaho

Re: Recent Projects

Post by Lodgepole »

Nice work!
User avatar
Skizzity
Gold Member
Posts: 482
Joined: Thu Feb 25, 2016 12:22 pm
Location: Colorado Springs

Re: RE: Re: Recent Projects

Post by Skizzity »

Lodgepole wrote:Nice work!
Thank you!
PowerPro Mark 7, 11" Bandsaw, 4" Jointer, 12" Professional Planer, DC3300 Dust Collector, DW745, DW718 w/ DW723 and a DW788 w/ DW7880.
Success is not final, failure is not fatal: it is the courage to continue that counts. -Winston Churchill
User avatar
john
Platinum Member
Posts: 1048
Joined: Mon Mar 05, 2007 7:42 pm
Location: St. Lambert , Quebec

Re: Recent Projects

Post by john »

I made similar candle holders several years ago but my design called for small diameter candles and only had four levels. I think yours are much more useful.

Great job on both projects!

John
User avatar
Skizzity
Gold Member
Posts: 482
Joined: Thu Feb 25, 2016 12:22 pm
Location: Colorado Springs

Re: RE: Re: Recent Projects

Post by Skizzity »

john wrote:I made similar candle holders several years ago but my design called for small diameter candles and only had four levels. I think yours are much more useful.

Great job on both projects!

John
Thanks. I used the 1/2" "Vigil" candles. A little less than 5" tall.
PowerPro Mark 7, 11" Bandsaw, 4" Jointer, 12" Professional Planer, DC3300 Dust Collector, DW745, DW718 w/ DW723 and a DW788 w/ DW7880.
Success is not final, failure is not fatal: it is the courage to continue that counts. -Winston Churchill
User avatar
reible
Platinum Member
Posts: 11283
Joined: Thu Jul 20, 2006 12:08 pm
Location: Aurora, IL

Re: Recent Projects

Post by reible »

Could you tell us about the finish on the utility stool?

Ed
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
masonsailor2
Platinum Member
Posts: 1564
Joined: Wed Feb 05, 2014 11:57 am
Location: Las Vegas NV

Re: Recent Projects

Post by masonsailor2 »

That is very nice !
Paul
User avatar
Skizzity
Gold Member
Posts: 482
Joined: Thu Feb 25, 2016 12:22 pm
Location: Colorado Springs

Re: RE: Re: Recent Projects

Post by Skizzity »

reible wrote:Could you tell us about the finish on the utility stool?

Ed
Sure! I used a couple coats of Minwax "Jacobean" stain. I then sprayed a few coats of Valspar Project Perfect Top Coat Satin finish.
PowerPro Mark 7, 11" Bandsaw, 4" Jointer, 12" Professional Planer, DC3300 Dust Collector, DW745, DW718 w/ DW723 and a DW788 w/ DW7880.
Success is not final, failure is not fatal: it is the courage to continue that counts. -Winston Churchill
User avatar
videobear
Gold Member
Posts: 180
Joined: Tue Aug 21, 2012 12:24 pm
Location: northern VA

Re: Recent Projects

Post by videobear »

The candle holder is beautiful! Love both the design and the implementation. The stool's great too...I love the way the stain brings out the grain so strongly, almost looks like some kind of expensive exotic wood.
Post Reply