Down Sizing (Required Work Area) aka Floor Space

Moderator: admin

User avatar
benush26
Platinum Member
Posts: 1104
Joined: Mon Mar 19, 2012 7:06 pm
Location: Montana

Re: Down Sizing (Required Work Area) aka Floor Space

Post by benush26 »

Gene Howe wrote:WANTED
FOUR CAR GARAGE WITH ONE BEDROOM HOUSE
If I ever built a new retirement home it might look like this

https://s-media-cache-ak0.pinimg.com/73 ... 9f7e5c.jpg

Though I could make the upstairs smaller and the downstairs larger :p

-----
Dusty,
Excited to read that you may soon again be making wood chips, saw dust and woodworking discoveries! :D

Be well,
Ben
User avatar
joedw00
Platinum Member
Posts: 1957
Joined: Thu Jul 20, 2006 7:01 pm
Location: Wichita, Kansas

Re: Down Sizing (Required Work Area) aka Floor Space

Post by joedw00 »

Better half's are like that.
Joe

520, Bandsaw, Beltsander, Delta Drill Press, Delta Lathe, Craftsman Planner/Jointer, Delta Planner, Mini "Greenie" Shorty 500

Being a VETERAN is an honor
Being a GRANDPA is priceless
User avatar
JPG
Platinum Member
Posts: 35457
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Re: Down Sizing (Required Work Area) aka Floor Space

Post by JPG »

benush26 wrote:
Gene Howe wrote:WANTED
FOUR CAR GARAGE WITH ONE BEDROOM HOUSE
If I ever built a new retirement home it might look like this

https://s-media-cache-ak0.pinimg.com/73 ... 9f7e5c.jpg

Though I could make the upstairs smaller and the downstairs larger :p

-----
Dusty,
Excited to read that you may soon again be making wood chips, saw dust and woodworking discoveries! :D

Be well,
Ben
I think the upstairs is filled with 'door' opener mechanism. :D
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
User avatar
reible
Platinum Member
Posts: 11283
Joined: Thu Jul 20, 2006 12:08 pm
Location: Aurora, IL

Re: Down Sizing (Required Work Area) aka Floor Space

Post by reible »

I have actually seen a house like that, well sort of. The lower half was an airplane hanger! I have pictures somewhere. The guy hosted a car show at his place(my bother and I attended), private air field and had the lower floor open to visit. Whole shop in there and still room for planes. Would loved to have seen the upstairs but that was out of bounds. (BTW this was their summer place. Not sure what he did or she did but they must have been well off.)

Ed
benush26 wrote:
Gene Howe wrote:WANTED
FOUR CAR GARAGE WITH ONE BEDROOM HOUSE
If I ever built a new retirement home it might look like this

https://s-media-cache-ak0.pinimg.com/73 ... 9f7e5c.jpg

Though I could make the upstairs smaller and the downstairs larger :p

-----
Dusty,
Excited to read that you may soon again be making wood chips, saw dust and woodworking discoveries! :D

Be well,
Ben
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
JohnHoeger
Silver Member
Posts: 9
Joined: Sat Mar 04, 2017 10:15 am

Re: Down Sizing (Required Work Area) aka Floor Space

Post by JohnHoeger »

Dusty,

I am glad to hear that you are making progress. Also glad you are being well taken care of.

John H in San Bernardino
User avatar
dusty
Platinum Member
Posts: 21481
Joined: Wed Nov 22, 2006 6:52 am
Location: Tucson (Wildcat Country), Arizona

Re: Down Sizing (Required Work Area) aka Floor Space

Post by dusty »

My wife got involved. Need I say more. She felt that I was jumping the gun on return to physical therapy. The doctors had originally told me restricted activity for a month. I had the surgery on the 24th. So the 17th will mark three weeks. She made a couple telephone calls and - you guessed it. I start back in therapy on May the 2nd. That's 40 days after surgery. That's a delay of almost two weeks. I'm bummed.

Now my task has changed just a little bit. Back into the shop and back into physical therapy are (in my mind) two different unrelated events.
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
User avatar
robinson46176
Platinum Member
Posts: 4182
Joined: Mon Mar 09, 2009 9:00 pm
Location: Central Indiana (Shelbyville)

Re: Down Sizing (Required Work Area) aka Floor Space

Post by robinson46176 »

Hang in there Dusty. That time will also pass.
Just remember, she can't stop you from doing shop work in your head. :) I do a lot of things in my head that Diana wouldn't approve of. :D :D :D
I do some of my best projects in my head and when I do them in my head they always come out perfect.
You wouldn't believe how good my shop looks as I plan in my head. :cool:
.
I was not always as well behaved as I should have been (2013 bypass) but I was pretty careful about not doing anything that "I" felt would hurt me. After the quad bypass I was in ICU overnight and then recovery about 5 days. The middle of the next week I was out trudging through about 6" to 8" of snow repairing electric fences for the horses. I was careful about never going out alone and I did let Diana do the pulling on the wire and I just did the tying off. They wanted me to do physical therapy but I declined. I told them that I had 100 acres of physical therapy... We had / have a good tread-mill and a recumbent exercise bike along with light weights. I was careful about hugging my special pillow when I coughed or sneezed and most regular warnings. I did tell them that I had been using this body for some time and was kind of familiar with it. :)
I have always been kind of stubborn and was always told as a kid that it was from my Barlow ancestor line. Some of them were industrial strength stubborn... :eek: :rolleyes: :D


.
--
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
User avatar
dusty
Platinum Member
Posts: 21481
Joined: Wed Nov 22, 2006 6:52 am
Location: Tucson (Wildcat Country), Arizona

Re: Down Sizing (Required Work Area) aka Floor Space

Post by dusty »

Thanks, francis. You do make me feel a little bit better about all of this. I get frustrated by being told I "can't do that" like I did not know. At any rate, I got the go ahead from everyone, including by better half (SWMBO), that I can start therapy sessions on May 2.

In the mean time, I get out there a few times a day for a few minutes and move things around, trying to sort what is to be discarded and what gets moved to the new house and what gets put in storage. I've posted a couple pictures of the mess I have created for myself.
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
User avatar
dusty
Platinum Member
Posts: 21481
Joined: Wed Nov 22, 2006 6:52 am
Location: Tucson (Wildcat Country), Arizona

Re: Down Sizing (Required Work Area) aka Floor Space

Post by dusty »

I thought that I was making great progress until I began gathering like items up for packing. If the need arises, I want to be able to get to certain tools, parts, etc., so boxing similar items seemed like a good approach.

Wow When I began emptying drawers, pulling items down off the wall and the like - I very quickly created an unbelievable stack of items to deal with.

Do you have any idea how much a box full of screw drivers, nut drivers, etc. weights. Same goes for allen wrenches, clamps (c-clamps), spring clamps, etc. It wasn't long into this task that I realized that I am really pushing my doctors prescribed weigh limits big time.

I'm anxious but I do want to live through this ordeal.
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
User avatar
JPG
Platinum Member
Posts: 35457
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Re: Down Sizing (Required Work Area) aka Floor Space

Post by JPG »

dusty wrote:I thought that I was making great progress until I began gathering like items up for packing. If the need arises, I want to be able to get to certain tools, parts, etc., so boxing similar items seemed like a good approach.

Wow When I began emptying drawers, pulling items down off the wall and the like - I very quickly created an unbelievable stack of items to deal with.

Do you have any idea how much a box full of screw drivers, nut drivers, etc. weights. Same goes for allen wrenches, clamps (c-clamps), spring clamps, etc. It wasn't long into this task that I realized that I am really pushing my doctors prescribed weigh limits big time.

I'm anxious but I do want to live through this ordeal.
Smaller boxes(shallower). ;)
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Post Reply