Need Parts for 1986 Total Shop
Moderator: admin
Need Parts for 1986 Total Shop
I was wondering if I can use a Shop Smith drive belt for my Total Shop Headstock. The one I have now is labeled "A24.5" Also, I need a new Poly V belt as well. Are they interchangeable?
Re: Need Parts for 1986 Total Shop
Is there a number on the old belt?
Hobbyman2 Favorite Quote: "If a man does his best, what else is there?"
- General George S. Patton (1885-1945)
- General George S. Patton (1885-1945)
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Need Parts for 1986 Total Shop
You have access to total shop part numbers H2?Hobbyman2 wrote:Is there a number on the old belt?
IIRC the SS belt is longer. I do not know re the poly-v belt.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Need Parts for 1986 Total Shop
Hobbyman2 Favorite Quote: "If a man does his best, what else is there?"
- General George S. Patton (1885-1945)
- General George S. Patton (1885-1945)
Re: Need Parts for 1986 Total Shop
You have access to total shop part numbers H2?
================
Most belts I am familiar with have a number stamped / printed on them , some can be matched at a hardware or auto parts facility by crossing the number.
Many times if you have a old belt with no numbers the parts house will have a gage that will give the length,,, and you can pick one off the shelf .
I did not see a number on the belt in the ebay add .
I am not sure it would be relevant unless you were ordering it from factory.
We have three places here in town that have belts or can order any thing you need .
As far as a part number for the saw it may not help ya out in a hardware store .
JMO
================
Most belts I am familiar with have a number stamped / printed on them , some can be matched at a hardware or auto parts facility by crossing the number.
Many times if you have a old belt with no numbers the parts house will have a gage that will give the length,,, and you can pick one off the shelf .
I did not see a number on the belt in the ebay add .
I am not sure it would be relevant unless you were ordering it from factory.
We have three places here in town that have belts or can order any thing you need .
As far as a part number for the saw it may not help ya out in a hardware store .
JMO
Hobbyman2 Favorite Quote: "If a man does his best, what else is there?"
- General George S. Patton (1885-1945)
- General George S. Patton (1885-1945)
Re: Need Parts for 1986 Total Shop
Thanks all! I found one!
Re: Need Parts for 1986 Total Shop
I also need a drive belt replacement for a Total Shop machine (I bought mine in the the late 1980's or early 1990's). You said you found one and I would like to know where you found it so I can see I can get one.
Thanks
Thanks