Today in the shop "Yet another shelf"
Moderator: admin
Today in the shop "Yet another shelf"
It still needs a bottom and casters but pretty near done.
This one is for my collection of Plano Plastics "small tackle" boxes. No tackle in them but plenty of other good stuff. The shelf can hold 26 boxes and it will be full, already have that many boxes and maybe a few more....
Weather permitting I should be moving it in tomorrow and filling it up.
Ed
This one is for my collection of Plano Plastics "small tackle" boxes. No tackle in them but plenty of other good stuff. The shelf can hold 26 boxes and it will be full, already have that many boxes and maybe a few more....
Weather permitting I should be moving it in tomorrow and filling it up.
Ed
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
Re: Today in the shop "Yet another shelf"
Little boxes on the driveway,
Little boxes made of ticky tacky,
Little boxes on the driveway,
Little boxes all the same.
There's a green one and a gray one
And a blue one and a red one,
And they're all made out of ticky tacky
And they all look just the same
Good thing they are all labeled.
Do they all fit? Why yes they do.
In place and filled now, just a few things to move back after the clearing of a path to get it in place. Have two boxes(not shown) that don't have a place, oh well you can only go so high and I reached that limit.
Ed
Little boxes made of ticky tacky,
Little boxes on the driveway,
Little boxes all the same.
There's a green one and a gray one
And a blue one and a red one,
And they're all made out of ticky tacky
And they all look just the same
Good thing they are all labeled.
Do they all fit? Why yes they do.
In place and filled now, just a few things to move back after the clearing of a path to get it in place. Have two boxes(not shown) that don't have a place, oh well you can only go so high and I reached that limit.
Ed
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
- dusty
- Platinum Member
- Posts: 21530
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
Re: Today in the shop "Yet another shelf"
Another great storage solution, Ed. I am sure that it fits with your needs quite well.
It would not work for me however, I wouldn't be able to read the six lower tier boxes unless I got down on the floor and probably not the four upper tier boxes. I certainly would not be able to remember where everything is at. This means that I would loose track of about half of what I have scattered around.
Then there is this problem of getting up off of the floor.
It would not work for me however, I wouldn't be able to read the six lower tier boxes unless I got down on the floor and probably not the four upper tier boxes. I certainly would not be able to remember where everything is at. This means that I would loose track of about half of what I have scattered around.
Then there is this problem of getting up off of the floor.
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.
Re: Today in the shop "Yet another shelf"
One can never be sure but I think you could read all the label. You may have trouble getting down to the lower ones(and back up) but the way I have arranged them is to have the least used items on the bottom and top with the most used in the middle.dusty wrote:Another great storage solution, Ed. I am sure that it fits with your needs quite well.
It would not work for me however, I wouldn't be able to read the six lower tier boxes unless I got down on the floor and probably not the four upper tier boxes. I certainly would not be able to remember where everything is at. This means that I would loose track of about half of what I have scattered around.
Then there is this problem of getting up off of the floor.
The letter might look small in the pictures but they are just shy of 1/4" tall:
Ed
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
- JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Today in the shop "Yet another shelf"
Another excellent storage solution!
Now about those square red things?
Now about those square red things?
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Today in the shop "Yet another shelf"
In your logo they be legs......JPG wrote:Another excellent storage solution!
Now about those square red things?
Ed
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
- JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Today in the shop "Yet another shelf"
Model 10 legs?reible wrote:In your logo they be legs......JPG wrote:Another excellent storage solution!
Now about those square red things?
Ed
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Today in the shop "Yet another shelf"
Yes. Back on that project too. To bad I can't remember where I stuck some of the parts...... that is going to slow me down.JPG wrote:Model 10 legs?reible wrote:In your logo they be legs......JPG wrote:Another excellent storage solution!
Now about those square red things?
Ed
Ed
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
- ChrisNeilan
- Platinum Member
- Posts: 1463
- Joined: Sun Oct 27, 2013 5:30 pm
- Location: Waterford, Connecticut
- Contact:
Re: Today in the shop "Yet another shelf"
Now I can't get that song out of my head. I'm hearing the Pete Seeger version! Good project.
Chris Neilan
Shopsmith Mark 7, Shopsmith Mark V 1982, shortened, Shopsmith 10 ER; Craftsman table saw (1964); Powermatic 3520B lathe
Shopsmith Mark 7, Shopsmith Mark V 1982, shortened, Shopsmith 10 ER; Craftsman table saw (1964); Powermatic 3520B lathe
- JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Today in the shop "Yet another shelf"
FWIW, my 'logo' is Mark VII vintage. 
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange