Steve Gass is at it again

Moderator: admin

User avatar
BuckeyeDennis
Platinum Member
Posts: 3812
Joined: Tue Jul 24, 2012 10:03 pm
Location: Central Ohio

Steve Gass is at it again

Post by BuckeyeDennis »

Despite considerable success in the market, it appears that Steve Gass is still lobbying the U.S. government to mandate SawStop technology. And NPR seems to be on the bandwagon.

http://www.npr.org/2017/08/10/542474093 ... er-drag-on

But I'm sure that the bureaucrats will let just let market forces work their magic. :rolleyes:
User avatar
algale
Platinum Member
Posts: 4841
Joined: Thu Nov 04, 2010 8:13 am

Re: Steve Gass is at it again

Post by algale »

I know I'm in the minority on this board, but I think a safety standard should be implemented. And I wonder who lobbied Congress to prevent CPSC from passing the rule? Could it be the PTI??
Gale's Law: The bigger the woodworking project, the less the mistakes show in any photo taken far enough away to show the entire project!

User avatar
BuckeyeDennis
Platinum Member
Posts: 3812
Joined: Tue Jul 24, 2012 10:03 pm
Location: Central Ohio

Re: Steve Gass is at it again

Post by BuckeyeDennis »

algale wrote:I know I'm in the minority on this board, but I think a safety standard should be implemented. And I wonder who lobbied Congress to prevent CPSC from passing the rule? Could it be the PTI??
Do you use your Shopsmith in table-saw mode?
User avatar
algale
Platinum Member
Posts: 4841
Joined: Thu Nov 04, 2010 8:13 am

Re: Steve Gass is at it again

Post by algale »

I do. And that proves zip.
Gale's Law: The bigger the woodworking project, the less the mistakes show in any photo taken far enough away to show the entire project!

User avatar
BuckeyeDennis
Platinum Member
Posts: 3812
Joined: Tue Jul 24, 2012 10:03 pm
Location: Central Ohio

Re: Steve Gass is at it again

Post by BuckeyeDennis »

algale wrote:I do. And that proves zip.
The defense rests, your honor. ;)
User avatar
rpd
Platinum Member
Posts: 3045
Joined: Tue Apr 05, 2011 3:22 am
Location: Victoria, B.C.

Re: Steve Gass is at it again

Post by rpd »

algale wrote:I know I'm in the minority on this board, but I think a safety standard should be implemented. And I wonder who lobbied Congress to prevent CPSC from passing the rule? Could it be the PTI??
I don't believe the problem is that he is promoting flesh sensing technology, but rather that he wants it mandated that everyone has to use HIS flesh sensing technology and does his best to suppress other solutions.
Ron Dyck
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
User avatar
algale
Platinum Member
Posts: 4841
Joined: Thu Nov 04, 2010 8:13 am

Re: Steve Gass is at it again

Post by algale »

That's not really true. That's not what the petition says.
Gale's Law: The bigger the woodworking project, the less the mistakes show in any photo taken far enough away to show the entire project!

Hobbyman2
Platinum Member
Posts: 2673
Joined: Wed Feb 01, 2017 12:52 am
Location: Ohio

Re: Steve Gass is at it again

Post by Hobbyman2 »

I like the technology as a safety device ,, not sure it should be a federal standard.

How many have removed the guards from their chop saws?

in the old days every one took the guard off.
Hobbyman2 Favorite Quote: "If a man does his best, what else is there?"
- General George S. Patton (1885-1945)
masonsailor2
Platinum Member
Posts: 1564
Joined: Wed Feb 05, 2014 11:57 am
Location: Las Vegas NV

Re: Steve Gass is at it again

Post by masonsailor2 »

The technology he has developed is the equivalent in woodworking to the invention of the light bulb in a historical sense. I have worked in the Emergency Room my entire adult life and his technology will ultimately save a lot of woodworkers from being called Stumpy. Keep in mind that this technology has been around for years. As far as trying to getting politicians to mandate it, well that's his right. It's also anyone else's right to oppose his proposals. It's sometimes a fine line between the safety of the public VS capitalism. Does the world need another situation where the law will dictate public safety ? Not sure on that one. But the same arguments were around over seat belts and then airbags. I think his fear is that if he doesn't force the issue it will never happen. Yes he is worth a lot of money and will undoubtedly be worth far more if he succeeds. As far as suppressing other similar technologies I don't slight him for trying, welcome to our world. If and when our elected officials allow that then they are the ones I have issues with. I guess the question is if not him and his technology then who ? Bosch ? Hitachi ? It's never going to be a freeby no matter who does it. I believe he is merely petitioning to have it considered an industry standard.
Paul
User avatar
jsburger
Platinum Member
Posts: 6585
Joined: Fri Jul 21, 2006 4:06 pm
Location: Hooper, UT

Re: Steve Gass is at it again

Post by jsburger »

masonsailor2 wrote:The technology he has developed is the equivalent in woodworking to the invention of the light bulb in a historical sense. I have worked in the Emergency Room my entire adult life and his technology will ultimately save a lot of woodworkers from being called Stumpy. Keep in mind that this technology has been around for years. As far as trying to getting politicians to mandate it, well that's his right. It's also anyone else's right to oppose his proposals. It's sometimes a fine line between the safety of the public VS capitalism. Does the world need another situation where the law will dictate public safety ? Not sure on that one. But the same arguments were around over seat belts and then airbags. I think his fear is that if he doesn't force the issue it will never happen. Yes he is worth a lot of money and will undoubtedly be worth far more if he succeeds. As far as suppressing other similar technologies I don't slight him for trying, welcome to our world. If and when our elected officials allow that then they are the ones I have issues with. I guess the question is if not him and his technology then who ? Bosch ? Hitachi ? It's never going to be a freeby no matter who does it. I believe he is merely petitioning to have it considered an industry standard.
Paul
All of that is well and good but he still wants it to be HIS system. He did successfully squash Bosch's entry into the same protection.
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Post Reply