All Dog Owners
Moderator: admin
All Dog Owners
Flea and tick season is upon us. Make sure they are not up on your dogs. Here's a tip: I use Fronline Plus but I don't do it the way the instructions say. I told my vet what I do and he says that's what he does and highly recommends it because you won't be over medicating your dogs - except for one potential problem which I'll explain after this:
I have an 11 pound dog. Frontline has a size for 6-22 lbs. dosage. Therefore, a full dose is twice the amount my dog needs (plus I'm paying twice as much). I did the math and no matter what size dose you get (I buy 89-132 lb. dog size). Multiply your dogs weight by .0305 and that gives you the mm dosage for your dog. Saves a lot of money and doesn't over do it with your dog. What you need is in the picture along with the dosage in case you forget. Pour the large dosage into the bottle before measuring.
Caveat: DO NOT FORGET to use the syringe. The vet said that if people buy the big dosage and forget and use it as directed on the package they can kill their dog. My own caveat: You can get good prices on ebay but read first how to tell if it is counterfeit. There's a lot of that out there.
I have an 11 pound dog. Frontline has a size for 6-22 lbs. dosage. Therefore, a full dose is twice the amount my dog needs (plus I'm paying twice as much). I did the math and no matter what size dose you get (I buy 89-132 lb. dog size). Multiply your dogs weight by .0305 and that gives you the mm dosage for your dog. Saves a lot of money and doesn't over do it with your dog. What you need is in the picture along with the dosage in case you forget. Pour the large dosage into the bottle before measuring.
Caveat: DO NOT FORGET to use the syringe. The vet said that if people buy the big dosage and forget and use it as directed on the package they can kill their dog. My own caveat: You can get good prices on ebay but read first how to tell if it is counterfeit. There's a lot of that out there.
- Attachments
-
- 1.JPG (254.87 KiB) Viewed 8116 times
Re: All Dog Owners
Thanks for that.
Re: All Dog Owners
Has someone hacked your log in???db5 wrote:Flea and tick season is upon us. Make sure they are not up on your dogs. Here's a tip: I use Fronline Plus but I don't do it the way the instructions say. I told my vet what I do and he says that's what he does and highly recommends it because you won't be over medicating your dogs - except for one potential problem which I'll explain after this:
I have an 11 pound dog. Frontline has a size for 6-22 lbs. dosage. Therefore, a full dose is twice the amount my dog needs (plus I'm paying twice as much). I did the math and no matter what size dose you get (I buy 89-132 lb. dog size). Multiply your dogs weight by .0305 and that gives you the mm dosage for your dog. Saves a lot of money and doesn't over do it with your dog. What you need is in the picture along with the dosage in case you forget. Pour the large dosage into the bottle before measuring.
Caveat: DO NOT FORGET to use the syringe. The vet said that if people buy the big dosage and forget and use it as directed on the package they can kill their dog. My own caveat: You can get good prices on ebay but read first how to tell if it is counterfeit. There's a lot of that out there.
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Eagle's Lair Woodshop
Hooper, UT
- ChrisNeilan
- Platinum Member
- Posts: 1463
- Joined: Sun Oct 27, 2013 5:30 pm
- Location: Waterford, Connecticut
- Contact:
Re: All Dog Owners
jsburger wrote:Has someone hacked your log in???db5 wrote:Flea and tick season is upon us. Make sure they are not up on your dogs. Here's a tip: I use Fronline Plus but I don't do it the way the instructions say. I told my vet what I do and he says that's what he does and highly recommends it because you won't be over medicating your dogs - except for one potential problem which I'll explain after this:
I have an 11 pound dog. Frontline has a size for 6-22 lbs. dosage. Therefore, a full dose is twice the amount my dog needs (plus I'm paying twice as much). I did the math and no matter what size dose you get (I buy 89-132 lb. dog size). Multiply your dogs weight by .0305 and that gives you the mm dosage for your dog. Saves a lot of money and doesn't over do it with your dog. What you need is in the picture along with the dosage in case you forget. Pour the large dosage into the bottle before measuring.
Caveat: DO NOT FORGET to use the syringe. The vet said that if people buy the big dosage and forget and use it as directed on the package they can kill their dog. My own caveat: You can get good prices on ebay but read first how to tell if it is counterfeit. There's a lot of that out there.![]()
Really John?
Chris Neilan
Shopsmith Mark 7, Shopsmith Mark V 1982, shortened, Shopsmith 10 ER; Craftsman table saw (1964); Powermatic 3520B lathe
Shopsmith Mark 7, Shopsmith Mark V 1982, shortened, Shopsmith 10 ER; Craftsman table saw (1964); Powermatic 3520B lathe
Re: All Dog Owners
Yes really. db5 has posted here hundreds of times. What does that post have anything to do with any of us except advertising? Has he ever done a similar post before?ChrisNeilan wrote:jsburger wrote:Has someone hacked your log in???db5 wrote:Flea and tick season is upon us. Make sure they are not up on your dogs. Here's a tip: I use Fronline Plus but I don't do it the way the instructions say. I told my vet what I do and he says that's what he does and highly recommends it because you won't be over medicating your dogs - except for one potential problem which I'll explain after this:
I have an 11 pound dog. Frontline has a size for 6-22 lbs. dosage. Therefore, a full dose is twice the amount my dog needs (plus I'm paying twice as much). I did the math and no matter what size dose you get (I buy 89-132 lb. dog size). Multiply your dogs weight by .0305 and that gives you the mm dosage for your dog. Saves a lot of money and doesn't over do it with your dog. What you need is in the picture along with the dosage in case you forget. Pour the large dosage into the bottle before measuring.
Caveat: DO NOT FORGET to use the syringe. The vet said that if people buy the big dosage and forget and use it as directed on the package they can kill their dog. My own caveat: You can get good prices on ebay but read first how to tell if it is counterfeit. There's a lot of that out there.![]()
Really John?
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Eagle's Lair Woodshop
Hooper, UT
Re: All Dog Owners
I'd rather know HOW to open the dose packaging. I use a knife to cut the foil around the green package.
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.
Bob
.
.
Bob
Re: All Dog Owners
So true!beeg wrote:I'd rather know HOW to open the dose packaging. I use a knife to cut the foil around the green package.
Gale's Law: The bigger the woodworking project, the less the mistakes show in any photo taken far enough away to show the entire project!
Re: All Dog Owners
No, that wasn't advertising. It just happens to be the brand I use. The principle applies to any of the flea and tick treatments. One picture saves a lot of words explaining in detail. I just thought it might be helpful to dog owners. I know some SS owners have machines that are dogs but this won't help them.
Re: All Dog Owners
This works quite well and is made specificly to open those clam-shell packages. Oh NO! Not another advertisement!beeg wrote:I'd rather know HOW to open the dose packaging. I use a knife to cut the foil around the green package.
- Attachments
-
- 1.JPG (40.96 KiB) Viewed 7987 times
-
- 2.JPG (39.13 KiB) Viewed 7987 times
- ChrisNeilan
- Platinum Member
- Posts: 1463
- Joined: Sun Oct 27, 2013 5:30 pm
- Location: Waterford, Connecticut
- Contact:
Re: All Dog Owners
Chris Neilan
Shopsmith Mark 7, Shopsmith Mark V 1982, shortened, Shopsmith 10 ER; Craftsman table saw (1964); Powermatic 3520B lathe
Shopsmith Mark 7, Shopsmith Mark V 1982, shortened, Shopsmith 10 ER; Craftsman table saw (1964); Powermatic 3520B lathe