Another Source for 20A Rocker Switch for C Series Headstock

Forum for Maintenance and Repair topics. Feel free to ask questions or contribute.

Moderator: admin

Post Reply
User avatar
everettdavis
Platinum Member
Posts: 2163
Joined: Thu Jul 17, 2014 11:49 am
Location: Lubbock, TX

Another Source for 20A Rocker Switch for C Series Headstock

Post by everettdavis »

While researching DC motor brush holders, brushes and caps for the DC Feed Motor for Shopsmith Planers in another thread, I came across this 20A Safety Toggle switch.

It is rated for 20A at 125 volt which meets or exceeds the spec for the OEM switch.

http://store.eurtonelectric.com/switche ... 66k21.aspx

Everett
20A Rocker Switch for C Series Headstock.png
20A Rocker Switch for C Series Headstock.png (381.6 KiB) Viewed 3250 times
Top
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Re: Another Source for 20A Rocker Switch for C Series Headstock

Post by JPG »

The HP rating tells it all. Good replacement!

Puny contact switches do not have decent HP rating.
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Top
Post Reply

Return to “Maintenance and Repair”