Model E Serial #E-3356 Tailstock taper?

ronwies · Post by **ronwies** » Sat Dec 08, 2018 11:43 am

I have a Model E Shopsmith and am interested in acquiring a live center tailstock. Question : What is the taper for the tailstock? I removed and measured the deadcenter and the taper is approx. 0.68" to 0.60" over length of 1.5" that doesn't appear to be a Morse Taper #2. So would a MT2 fit this model or is there an adapter?

rpd · Post by **rpd** » Sat Dec 08, 2018 11:48 am

Yes, all Shopsmith tail-stock's, from the 10E to the present, are 2Morse taper,

JPG · Post by **JPG** » Sat Dec 08, 2018 6:05 pm

ronwies wrote:I have a Model E Shopsmith and am interested in acquiring a live center tailstock. Question : What is the taper for the tailstock? I removed and measured the deadcenter and the taper is approx. 0.68" to 0.60" over length of 1.5" that doesn't appear to be a Morse Taper #2. So would a MT2 fit this model or is there an adapter?

MT2 taper is 0.04997 per inch.

Over 1.5" that is 0.749.

When measuring one really needs to get more than three decimal places.

Rest assured an OEM SS tail stock socket IS MT2.

ronwies · Post by **ronwies** » Tue Dec 11, 2018 9:50 am

Thanks

Shopsmith Forums

Model E Serial #E-3356 Tailstock taper?

Model E Serial #E-3356 Tailstock taper?

Re: Model E Serial #E-3356 Tailstock taper?

Re: Model E Serial #E-3356 Tailstock taper?

Re: Model E Serial #E-3356 Tailstock taper?