- 514366 Upper Guard assembly r.jpg (286.75 KiB) Viewed 5240 times
New Owner. What’ part is this?
Moderator: admin
-
chapmanruss
- Platinum Member
- Posts: 4545
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: New Owner. What’ part is this?
A new upper saw guard from Shopsmith is part number 514366 and is $86.09 plus shipping. Used ones can be found at the online auctions. If you look for a used one become familiar with what a complete one includes. Although in this case it requires tools to separate it's parts so it is unlikely one for sale would have parts missing. Here is a picture of the upper guard assembly.
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's, 2 Power Stations & Crafter's Station
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's, 2 Power Stations & Crafter's Station
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored.
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: New Owner. What’ part is this?
WOW! IIRC the last one I purchased new was closer to $30!
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: New Owner. What’ part is this?
Ouch, $86! Sure wish I lived in the $30 days.
But ok, thanks everyone!
But ok, thanks everyone!
-
chapmanruss
- Platinum Member
- Posts: 4545
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: New Owner. What’ part is this?
If you are buying the complete upper guard as shown in my picture it $86.09, if you are buying just the plastic replacement part it's $24.35. Plus S & H in either case. Of course this guard has been around since the introduction of the Mark V 510 (& 505) in 1985. Inflation is a bummer. 
JPG, didn't you pay around $350 for your Mark 5 when it was new?
JPG, didn't you pay around $350 for your Mark 5 when it was new?
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's, 2 Power Stations & Crafter's Station
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's, 2 Power Stations & Crafter's Station
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored.
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: New Owner. What’ part is this?
Affirmative!chapmanruss wrote:If you are buying the complete upper guard as shown in my picture it $86.09, if you are buying just the plastic replacement part it's $24.35. Plus S & H in either case. Of course this guard has been around since the introduction of the Mark V 510 (& 505) in 1985. Inflation is a bummer.
JPG, didn't you pay around $350 for your Mark 5 when it was
new?
Oh and I now think I only got the plastic part.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange