I know I found this information buried in a forum post before, but I searched and could not find it again for the life of me.
Can someone please provide measurements for the two 1.25" arbors:
555130 1-1/4" Saw Blade Arbor (for MARK 7 and MARK V Models 520,510 and 505)
505511 1-1/4" Saw Blade Arbor (for MARK V Model 500)
I have a handful of arbors, all the same dimension, but I don't know if they are all 500s or 505+.
Thanks in advance!
Saw arbor measurements - 500 vs 505/510/520/M7
Moderator: admin
-
reubenjames
- Gold Member
- Posts: 335
- Joined: Tue Apr 30, 2013 10:20 am
- Location: Cedar Rapids, IA
Saw arbor measurements - 500 vs 505/510/520/M7
Alec S.
1985 Mark V upgraded to 520 and Power Pro (SN 000527)
1983 Mark V Shop Deputy (SN 163487)
1982 Mark V headstock (SN 122265)
1949 (?) 10 ER in transition to dedicated drill press (SN 18677)
11" Band Saw (Aluminum Table System upgrade) (SN 34026)
4" Jointer (SN 02-18-98)
6" Belt Sander (SN 19012)
18" Jig Saw (SN 17407)
20" Scroll Saw (SN 010593)
12" Thickness Planer (SN 10406)
Strip Sander (SN pending)
DC3300 Dust Collector (SN 102088)
1985 Mark V upgraded to 520 and Power Pro (SN 000527)
1983 Mark V Shop Deputy (SN 163487)
1982 Mark V headstock (SN 122265)
1949 (?) 10 ER in transition to dedicated drill press (SN 18677)
11" Band Saw (Aluminum Table System upgrade) (SN 34026)
4" Jointer (SN 02-18-98)
6" Belt Sander (SN 19012)
18" Jig Saw (SN 17407)
20" Scroll Saw (SN 010593)
12" Thickness Planer (SN 10406)
Strip Sander (SN pending)
DC3300 Dust Collector (SN 102088)
-
chapmanruss
- Platinum Member
- Posts: 4545
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: Saw arbor measurements - 500 vs 505/510/520/M7
505511 has an overall length of 1-5/8"
555130 has an overall length of 2"
The longer length of the 555130 Arbor was needed due to the design of the lower blade guard for the Model 510, 505, 520 and new Mark 7.
555130 has an overall length of 2"
The longer length of the 555130 Arbor was needed due to the design of the lower blade guard for the Model 510, 505, 520 and new Mark 7.
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's, 2 Power Stations & Crafter's Station
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's, 2 Power Stations & Crafter's Station
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored.
-
reubenjames
- Gold Member
- Posts: 335
- Joined: Tue Apr 30, 2013 10:20 am
- Location: Cedar Rapids, IA
Re: Saw arbor measurements - 500 vs 505/510/520/M7
Thanks for the quick reply, as always!
Sent from my KFSUWI using Tapatalk
Sent from my KFSUWI using Tapatalk
Alec S.
1985 Mark V upgraded to 520 and Power Pro (SN 000527)
1983 Mark V Shop Deputy (SN 163487)
1982 Mark V headstock (SN 122265)
1949 (?) 10 ER in transition to dedicated drill press (SN 18677)
11" Band Saw (Aluminum Table System upgrade) (SN 34026)
4" Jointer (SN 02-18-98)
6" Belt Sander (SN 19012)
18" Jig Saw (SN 17407)
20" Scroll Saw (SN 010593)
12" Thickness Planer (SN 10406)
Strip Sander (SN pending)
DC3300 Dust Collector (SN 102088)
1985 Mark V upgraded to 520 and Power Pro (SN 000527)
1983 Mark V Shop Deputy (SN 163487)
1982 Mark V headstock (SN 122265)
1949 (?) 10 ER in transition to dedicated drill press (SN 18677)
11" Band Saw (Aluminum Table System upgrade) (SN 34026)
4" Jointer (SN 02-18-98)
6" Belt Sander (SN 19012)
18" Jig Saw (SN 17407)
20" Scroll Saw (SN 010593)
12" Thickness Planer (SN 10406)
Strip Sander (SN pending)
DC3300 Dust Collector (SN 102088)