Looking at the online catalog this morning I noticed something strange about the Purchase Your Shopsmith page. See link below. The Mark V 510 is not there. I remember it was listed the last time I saw that page. Has it gone away like the Mark V 500 and 505? My guess is Mark V purchasers are going for the Pro Fence so no need for the 510. A new entry for the Shopsmith history page.
https://www.shopsmith.com/markvsite/purchaseNB.htm
.
Goodbye Mark V 510
Moderator: admin
-
chapmanruss
- Platinum Member
- Posts: 4555
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Goodbye Mark V 510
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's, 2 Power Stations & Crafter's Station
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's, 2 Power Stations & Crafter's Station
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored.
-
edflorence
- Platinum Member
- Posts: 689
- Joined: Thu Jul 20, 2006 8:14 pm
- Location: Idaho Panhandle
Re: Goodbye Mark V 510
Interestingly, the text of the description for the 520 still contains a reference to the 510.
Ed
Idaho Panhandle
Mark 5 of various vintages, Mini with reversing motor, bs, dc3300, jointer, increaser, decreaser
Idaho Panhandle
Mark 5 of various vintages, Mini with reversing motor, bs, dc3300, jointer, increaser, decreaser
Re: Goodbye Mark V 510
If anyone wants a quick look at the webpage from July, check out the link below for comparison:
https://web.archive.org/web/20190721180 ... haseNB.htm
https://web.archive.org/web/20190721180 ... haseNB.htm
RF GuyMark V 520 (Bought New '98) | 4" jointer | 6" beltsander | 12" planer | bandsaw | router table | speed reducer | univ. tool rest
Porter Cable 12" Compound Miter Saw | Rikon 8" Low Speed Bench Grinder w/CBN wheels | Jessem Clear-Cut TS™ Stock Guides
Festool (Emerald): DF 500 Q | RO 150 FEQ | OF 1400 EQ | TS 55 REQ | CT 26 E
DC3300 | Shopvac w/ClearVue CV06 Mini Cyclone | JDS AirTech 2000 | Sundstrom PAPR | Dylos DC1100 Pro particulate monitor
Re: Goodbye Mark V 510
What is ironic is that the 510 had more reviews and a better review rating than the 520 in the July website.
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Goodbye Mark V 510
???dms8667 wrote:What is ironic is that the 510 had more reviews and a better review rating than the 520 in the July website.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Goodbye Mark V 510
The link I posted was to one of the web archives of the Shopsmith website. The archive was taken in July 2019. Below is what was on the website at the link Russ posted in July. I posted the web archive of this link just to make it easier to compare to what was there before showing the 510 for sale...JPG wrote:???dms8667 wrote:What is ironic is that the 510 had more reviews and a better review rating than the 520 in the July website.
- July_Web_Archive.jpg (198.57 KiB) Viewed 14410 times
RF GuyMark V 520 (Bought New '98) | 4" jointer | 6" beltsander | 12" planer | bandsaw | router table | speed reducer | univ. tool rest
Porter Cable 12" Compound Miter Saw | Rikon 8" Low Speed Bench Grinder w/CBN wheels | Jessem Clear-Cut TS™ Stock Guides
Festool (Emerald): DF 500 Q | RO 150 FEQ | OF 1400 EQ | TS 55 REQ | CT 26 E
DC3300 | Shopvac w/ClearVue CV06 Mini Cyclone | JDS AirTech 2000 | Sundstrom PAPR | Dylos DC1100 Pro particulate monitor
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Goodbye Mark V 510
Add the underlined part to the original ???.JPG wrote:???dms8667 wrote:What is ironic is that the 510 had more reviews and a better review rating than the 520 in the July website.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
-
chapmanruss
- Platinum Member
- Posts: 4555
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: Goodbye Mark V 510
RFGuy,
You said above
You said above
Just to keep things straight I started this thread yesterday and the link is for the current catalog listing. I did not post this in July.Below is what was on the website at the link Russ posted in July.
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's, 2 Power Stations & Crafter's Station
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's, 2 Power Stations & Crafter's Station
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored.
-
davebodner
- Gold Member
- Posts: 476
- Joined: Sun Nov 09, 2008 4:38 pm
- Location: Arlington, VA
Re: Goodbye Mark V 510
I noticed the last advertisement I saw (maybe a week ago) listed the 510, but it showed a picture of the 520.
Pure speculation on my part: Perhaps they aren't ordering any more 510-specific parts, but they're selling the 510 until they use up their supply of those parts.
Pure speculation on my part: Perhaps they aren't ordering any more 510-specific parts, but they're selling the 510 until they use up their supply of those parts.