Gift for all of you

Moderator: admin

Post Reply
User avatar
reible
Platinum Member
Posts: 11283
Joined: Thu Jul 20, 2006 12:08 pm
Location: Aurora, IL

Gift for all of you

Post by reible »

Hi,

This is the season and like it or not I have a gift for you. I just finished it so be careful the finish might not be dry yet. Anyway I did a spread sheet conversion chart for myself and thought some of you might like it as well.

See sample:
[ATTACH]2573[/ATTACH]

File:
[ATTACH]2575[/ATTACH]

Ed

The org chart had 25mm listed twice, one of those should have been 24, decimal .9449 so you will need up update any printed copies and download the new chart which is rev a. (appears on bottom of chart)
Attachments
ScreenHunter_020.jpg
ScreenHunter_020.jpg (19.14 KiB) Viewed 8828 times
conversion chart rev a.pdf
(21.24 KiB) Downloaded 1160 times
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
Top
User avatar
dusty
Platinum Member
Posts: 21481
Joined: Wed Nov 22, 2006 6:52 am
Location: Tucson (Wildcat Country), Arizona

Post by dusty »

Thank you, Ed.

I saved it off to the hard drive and made 4 copies for in the shop. With 4 copies I should always be able to find one.

Feliz Navidad to all who read this and to those others as well. May you all have a prosperous New Year and an especially prosperous New Year for Shopsmith.

Darn, maybe this is the season when Shopsmith announces the availability of the new Mark V Model 530 (or whatever).
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Top
ldh
Gold Member
Posts: 430
Joined: Sun Sep 10, 2006 6:09 pm
Location: Phoenix, AZ

Post by ldh »

Ed,
Handy chart for all of us, thanks. Have a nice HOLIDAY and keep your fingers crossed that Shopsmith does to.
ldh
Top
User avatar
fixit
Gold Member
Posts: 439
Joined: Fri Jul 21, 2006 8:44 pm
Location: La Vernia, TX

Post by fixit »

Thanks Ed,

I've been meaning to make one of these for a long time and it just never made it to the top of my "to do" list. Now I don't have to - can scratch it off my list!

Merry Christmas and Happy New Year to you and yours - and to all the members of this great forum!
:)
----------------------------------------
Leonard
La Vernia, TX
Wood Goods - Custom Woodwork
EMAIL: woodgoods "at" lavernia "dot" net
PowerPro 520, PowerPro 500 (was my father's 500), SS jointer, SS Mark V mount planer, SS bandsaws (2), belt sander, scroll saw, SS jig saws (2), strip sander, Jointech system, 12" Delta Compound Miter Saw, a small collection of routers, a router table and a Delta Unisaw. All in a 24' x 24' shop.
Top
User avatar
curiousgeorge
Platinum Member
Posts: 880
Joined: Tue Feb 27, 2007 1:00 am
Location: Fort Worth, Texas

Post by curiousgeorge »

Thank you Ed.

Merry Christmas to everyone and a Happy New Year!!!!

Even to those whom this term bothers. But, then, that's your problem. Not mine.
George
Ft. Worth, TX.
Go TCU Froggies
Top
User avatar
tom_k/mo
Platinum Member
Posts: 856
Joined: Mon Jul 14, 2008 3:58 pm
Location: St. Louis, MO
Contact:
Contact tom_k/mo

Post by tom_k/mo »

Thanks Ed.

I'll add this one for the group. If you're looking for a neat little utility that will convert almost ANYTHING, Convert For Windows is a great little free utility. I've used it for years. Only problem is, you can't take it out to the shop with you like Ed's print-out... ;)

Thanks again Ed, and Merry Christmas to all...
ShopSmith MarkV-520 with Belt Sander, Jointer, Band Saw, Strip Sander, Scroll Saw and Biscuit Jointer SPTs and a DC-3300...
Woodworking Hobbyist (Check out all my Woodworking Plans (http://vbwhiz.isa-geek.net/plans)
Aspiring Sandcarver: Breaking glass one grain at a time.
Black Powder Shooter (love the smell of burning sulfur).
Top
paul heller
Gold Member
Posts: 288
Joined: Thu Jul 20, 2006 7:41 pm
Location: Arvada, CO

Post by paul heller »

Thanks, Ed!
Top
User avatar
a1gutterman
Platinum Member
Posts: 3653
Joined: Tue Jan 09, 2007 12:45 am
Location: "close to" Seattle

Post by a1gutterman »

Thank you for your gift, Ed! Merry Image Christmas to all and Happy New Year too! Image
Tim

Buying US made products will help keep YOUR job or retirement funds safer.
Top
User avatar
reible
Platinum Member
Posts: 11283
Joined: Thu Jul 20, 2006 12:08 pm
Location: Aurora, IL

Post by reible »

It looks like my chart has a small error. The line after 15/16 reads 25mm that should be 24 mm and the decimal is .9449. Sorry to all that printed it up already... a revised version will be posted within minutes.

I did the chart minus the even mm numbers so I had to go back as an after thought and hand enter them and well that is why us older guys retire, we just can't hack the mundane tasks of entering numbers from 1 to 25 without making an error.

Ed
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
Top
User avatar
JPG
Platinum Member
Posts: 35432
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Number Sequence In Spread Sheet

Post by JPG »

NEXT TIME SET FIRST CELL = 1
SET SECOND CELL = "FIRST CELL" + 1
COPY SECOND CELL TO "THIRD CELL" THRU "LAST CELL".

HOPE THIS MAKES SENSE. I AM TRYING TO BE GENERAL AND NON PROGRAM SPECIFIC!:p

thanks>thanks>thanks>thanks>thanks>thanks FOR YOUR EFFORT ON THIS....GOOD JOB!!!!!
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Top
Post Reply

Return to “Community”