Earthquake in Salt Lake City, Utah area.

Moderator: admin

User avatar
dusty
Platinum Member
Posts: 21530
Joined: Wed Nov 22, 2006 6:52 am
Location: Tucson (Wildcat Country), Arizona

Earthquake in Salt Lake City, Utah area.

Post by dusty »

Do hope that jsburger is OKAY.
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
garys
Platinum Member
Posts: 2075
Joined: Wed Mar 02, 2011 12:16 am
Location: Bismarck, ND

Re: Earthquake in Salt Lake City, Utah area.

Post by garys »

My Wife's neice lives there. She says it was near the surface so they have some damage. Their buildings aren't earthquake hardened like California so they will likely see more damage. The neice couldn't go to work because the building she works in suffered damage and nobody is allowed in until the damage is assessed.
User avatar
jsburger
Platinum Member
Posts: 6585
Joined: Fri Jul 21, 2006 4:06 pm
Location: Hooper, UT

Re: Earthquake in Salt Lake City, Utah area.

Post by jsburger »

dusty wrote:Do hope that jsburger is OKAY.
Thank you for asking. Everything is fine.

It was a Magnitude 5.7 centered just SW of the Salt Lake International Airport. It occurred at 7:09AM. We live about 35 miles as the crow flies from the epicenter. It shook the house pretty good but no damage here. So far there have been 33 after shocks. The largest was Magnitude 4.4 which is the only one we have felt. USGS has said the earthquake occurred about 6 miles below the surface of the earth.

Overall damage has been light even in Magna which is very close to the epicenter. No injures or deaths. The airport is closed. No damage to the runways but they have to assess the terminal building before they let people back in.
Attachments
20200318_093859-1.jpg
20200318_093859-1.jpg (287.25 KiB) Viewed 9776 times
20200318_093938.jpg
20200318_093938.jpg (337.59 KiB) Viewed 9776 times
Last edited by jsburger on Wed Mar 18, 2020 4:55 pm, edited 1 time in total.
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
User avatar
jsburger
Platinum Member
Posts: 6585
Joined: Fri Jul 21, 2006 4:06 pm
Location: Hooper, UT

Re: Earthquake in Salt Lake City, Utah area.

Post by jsburger »

The Salt Lake International Airport is now back open.
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
User avatar
chapmanruss
Platinum Member
Posts: 4534
Joined: Tue Aug 26, 2014 8:16 pm
Location: near Portland, Oregon

Re: Earthquake in Salt Lake City, Utah area.

Post by chapmanruss »

John,

I am glad all is well there with you. Hopefully it's just the earth letting a little pressure off and not an indication of more to come. Did you mentioned Magna for those of us who enjoy Shopsmith history?
Russ

Mark V completely upgraded to Mark 7
Mark V 520
All SPT's, 2 Power Stations & Crafter's Station
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored.
User avatar
jsburger
Platinum Member
Posts: 6585
Joined: Fri Jul 21, 2006 4:06 pm
Location: Hooper, UT

Re: Earthquake in Salt Lake City, Utah area.

Post by jsburger »

chapmanruss wrote:John,

I am glad all is well there with you. Hopefully it's just the earth letting a little pressure off and not an indication of more to come. Did you mentioned Magna for those of us who enjoy Shopsmith history?
No but I wondered if anyone would pick up on that. Magna was the epicenter for the earth quake. For those that are wondering what we are talking about, Frank and Bob Chambers who formed Magna Engineering along with Hans Goldschmidt the inventor of the Shopsmith were from Magna, UT. Magna Engineering was named for Magna, UT. Another interesting bit of history is that the Magna Engineering internal news letter was called the Magpie. Magpies are very prolific in Utah.

We are up to 52 after shocks. They are getting farther apart and all have been in the 2 to 3 magnitude range.
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
User avatar
jsburger
Platinum Member
Posts: 6585
Joined: Fri Jul 21, 2006 4:06 pm
Location: Hooper, UT

Re: Earthquake in Salt Lake City, Utah area.

Post by jsburger »

Just had another after shock that we could feel here. #57 Magnitude 4.6
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
sehast
Gold Member
Posts: 497
Joined: Sun Apr 12, 2015 6:53 pm
Location: Milpitas, CA

Re: Earthquake in Salt Lake City, Utah area.

Post by sehast »

Man that is a lot of after shocks. We are used to these (truth be told you never get used to them) in CA but never had that many significant after shocks. Glad you are OK but what a ride.
User avatar
JPG
Platinum Member
Posts: 35598
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Re: Earthquake in Salt Lake City, Utah area.

Post by JPG »

sehast wrote:Man that is a lot of after shocks. We are used to these (truth be told you never get used to them) in CA but never had that many significant after shocks. Glad you are OK but what a ride.
Better those itty bitty aftershocks that relieve stress than the strain of another biggie. Glad all is well.

Now about the 'magna' location. What do they call that stuff that oozes out of the sides of volcanoes?(before it oozes).
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
User avatar
JPG
Platinum Member
Posts: 35598
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Re: Earthquake in Salt Lake City, Utah area.

Post by JPG »

sehast wrote:Man that is a lot of after shocks. We are used to these (truth be told you never get used to them) in CA but never had that many significant after shocks. Glad you are OK but what a ride.
Better those itty bitty aftershocks that relieve stress than the strain of another biggie. Glad all is well.

Now about the 'magna' location. What do they call that stuff that oozes out of the sides of volcanoes?(before it oozes). What's a missing 'hump' among friends? . . . . . . . . . . . m/n :rolleyes:


P.S. Did it cause the coukoo(sp?) clock to stop?

Cuckoo :o
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Post Reply