I have owned a joiner but have been out of WW for a few years and have never used it, With pandemic I have been in my shop again and put the joiner on the mount to check it out. The fence was moving freely so i moved it clear to the left. I tried to move the fence back to the right side, but it is frozen. Soft taps with rubber mallet no help. Ideas?
Sam
SS Joiner fence stuck
Moderator: admin
Re: SS Joiner fence stuck
Sam,
Did the fence maybe lock on you after you slid it to the left? Remember the fence handle both sets the angle of the fence and locks it in place. I am quoting Dennis' quote below from a different thread to describe the dual action nature of the fence handle. My guess is the fence is just locked in place now.
Did the fence maybe lock on you after you slid it to the left? Remember the fence handle both sets the angle of the fence and locks it in place. I am quoting Dennis' quote below from a different thread to describe the dual action nature of the fence handle. My guess is the fence is just locked in place now.
http://shopsmith.com/ss_forum/viewtopic ... le#p256752BuckeyeDennis wrote: The handle is basically a double-sided socket wrench. Push it inward, and it engages one locking nut. Pull it out, and it engages a different locking nut. One of them locks the tilt angle of the fence, and the other locks the quadrant to that rectangular bar. I always forget which is which myself..
RF GuyMark V 520 (Bought New '98) | 4" jointer | 6" beltsander | 12" planer | bandsaw | router table | speed reducer | univ. tool rest
Porter Cable 12" Compound Miter Saw | Rikon 8" Low Speed Bench Grinder w/CBN wheels | Jessem Clear-Cut TS™ Stock Guides
Festool (Emerald): DF 500 Q | RO 150 FEQ | OF 1400 EQ | TS 55 REQ | CT 26 E
DC3300 | Shopvac w/ClearVue CV06 Mini Cyclone | JDS AirTech 2000 | Sundstrom PAPR | Dylos DC1100 Pro particulate monitor
Re: SS Joiner fence stuck
Thanks! may all our "problems be solved so easily