Tablesaw Power feed
Moderators: HopefulSSer, admin
Re: Tablesaw Power feed
FYI I'm not seeing a flag on that site.........
Ed
Ed
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
Re: Tablesaw Power feed
What anti-malware SW are you running?
RF Guy
Mark V 520 (Bought New '98) | 4" jointer | 6" beltsander | 12" planer | bandsaw | router table | speed reducer | univ. tool rest
Porter Cable 12" Compound Miter Saw | Rikon 8" Low Speed Bench Grinder w/CBN wheels | Jessem Clear-Cut TS™ Stock Guides
Festool (Emerald): DF 500 Q | RO 150 FEQ | OF 1400 EQ | TS 55 REQ | CT 26 E
DC3300 | Shopvac w/ClearVue CV06 Mini Cyclone | JDS AirTech 2000 | Sundstrom PAPR | Dylos DC1100 Pro particulate monitor
Mark V 520 (Bought New '98) | 4" jointer | 6" beltsander | 12" planer | bandsaw | router table | speed reducer | univ. tool rest
Porter Cable 12" Compound Miter Saw | Rikon 8" Low Speed Bench Grinder w/CBN wheels | Jessem Clear-Cut TS™ Stock Guides
Festool (Emerald): DF 500 Q | RO 150 FEQ | OF 1400 EQ | TS 55 REQ | CT 26 E
DC3300 | Shopvac w/ClearVue CV06 Mini Cyclone | JDS AirTech 2000 | Sundstrom PAPR | Dylos DC1100 Pro particulate monitor
Re: Tablesaw Power feed
CyberSec
McAfee
IOBit Malware
What are you using?
McAfee
IOBit Malware
What are you using?
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
Re: Tablesaw Power feed
MalwareBytes caught it. I have been using it for malware protection for years and trust it.
RF Guy
Mark V 520 (Bought New '98) | 4" jointer | 6" beltsander | 12" planer | bandsaw | router table | speed reducer | univ. tool rest
Porter Cable 12" Compound Miter Saw | Rikon 8" Low Speed Bench Grinder w/CBN wheels | Jessem Clear-Cut TS™ Stock Guides
Festool (Emerald): DF 500 Q | RO 150 FEQ | OF 1400 EQ | TS 55 REQ | CT 26 E
DC3300 | Shopvac w/ClearVue CV06 Mini Cyclone | JDS AirTech 2000 | Sundstrom PAPR | Dylos DC1100 Pro particulate monitor
Mark V 520 (Bought New '98) | 4" jointer | 6" beltsander | 12" planer | bandsaw | router table | speed reducer | univ. tool rest
Porter Cable 12" Compound Miter Saw | Rikon 8" Low Speed Bench Grinder w/CBN wheels | Jessem Clear-Cut TS™ Stock Guides
Festool (Emerald): DF 500 Q | RO 150 FEQ | OF 1400 EQ | TS 55 REQ | CT 26 E
DC3300 | Shopvac w/ClearVue CV06 Mini Cyclone | JDS AirTech 2000 | Sundstrom PAPR | Dylos DC1100 Pro particulate monitor
Re: Tablesaw Power feed
Are you running an ad blocker? My ad blocker picked up two ad's but then they are blocked so if the issue is with the ad's my software will not see them thus not detect them because of how all this works together.........
Ed
Ed
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
Re: Tablesaw Power feed
I only run Adblock for YouTube on my system, no other adblockers. You can see the malware warning below that I get for that site:
RF Guy
Mark V 520 (Bought New '98) | 4" jointer | 6" beltsander | 12" planer | bandsaw | router table | speed reducer | univ. tool rest
Porter Cable 12" Compound Miter Saw | Rikon 8" Low Speed Bench Grinder w/CBN wheels | Jessem Clear-Cut TS™ Stock Guides
Festool (Emerald): DF 500 Q | RO 150 FEQ | OF 1400 EQ | TS 55 REQ | CT 26 E
DC3300 | Shopvac w/ClearVue CV06 Mini Cyclone | JDS AirTech 2000 | Sundstrom PAPR | Dylos DC1100 Pro particulate monitor
Mark V 520 (Bought New '98) | 4" jointer | 6" beltsander | 12" planer | bandsaw | router table | speed reducer | univ. tool rest
Porter Cable 12" Compound Miter Saw | Rikon 8" Low Speed Bench Grinder w/CBN wheels | Jessem Clear-Cut TS™ Stock Guides
Festool (Emerald): DF 500 Q | RO 150 FEQ | OF 1400 EQ | TS 55 REQ | CT 26 E
DC3300 | Shopvac w/ClearVue CV06 Mini Cyclone | JDS AirTech 2000 | Sundstrom PAPR | Dylos DC1100 Pro particulate monitor
Re: Tablesaw Power feed
FWIW, I get the same thing here with Malwarebytes. I have been using the paid version for years on 4 computers and my phones. I also trust it.
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Eagle's Lair Woodshop
Hooper, UT
Re: Tablesaw Power feed
Thanks John. Since you see it as well, should I report the post for the link? I didn't want to report it initially because I didn't want the entire post removed, just the link. My only concern was another forum user going to that weblink and having computer problems because of it so I wanted to warn other members.
P.S. I don't see malware warnings often from MalwareBytes so when I do see it, I tend to take them seriously. Often it is from an older website, e.g. for a small manufacturing company, etc. that isn't on top of the latest server security for their website and/or don't have the latest security certificates.
RF Guy
Mark V 520 (Bought New '98) | 4" jointer | 6" beltsander | 12" planer | bandsaw | router table | speed reducer | univ. tool rest
Porter Cable 12" Compound Miter Saw | Rikon 8" Low Speed Bench Grinder w/CBN wheels | Jessem Clear-Cut TS™ Stock Guides
Festool (Emerald): DF 500 Q | RO 150 FEQ | OF 1400 EQ | TS 55 REQ | CT 26 E
DC3300 | Shopvac w/ClearVue CV06 Mini Cyclone | JDS AirTech 2000 | Sundstrom PAPR | Dylos DC1100 Pro particulate monitor
Mark V 520 (Bought New '98) | 4" jointer | 6" beltsander | 12" planer | bandsaw | router table | speed reducer | univ. tool rest
Porter Cable 12" Compound Miter Saw | Rikon 8" Low Speed Bench Grinder w/CBN wheels | Jessem Clear-Cut TS™ Stock Guides
Festool (Emerald): DF 500 Q | RO 150 FEQ | OF 1400 EQ | TS 55 REQ | CT 26 E
DC3300 | Shopvac w/ClearVue CV06 Mini Cyclone | JDS AirTech 2000 | Sundstrom PAPR | Dylos DC1100 Pro particulate monitor
Re: Tablesaw Power feed
That is up to you. You informed the OP and the Moderators should see these posts so...RFGuy wrote: ↑Thu Mar 18, 2021 1:26 pmThanks John. Since you see it as well, should I report the post for the link? I didn't want to report it initially because I didn't want the entire post removed, just the link. My only concern was another forum user going to that weblink and having computer problems because of it so I wanted to warn other members.
P.S. I don't see malware warnings often from MalwareBytes so when I do see it, I tend to take them seriously. Often it is from an older website, e.g. for a small manufacturing company, etc. that isn't on top of the latest server security for their website and/or don't have the latest security certificates.
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Eagle's Lair Woodshop
Hooper, UT
Re: Tablesaw Power feed
Hi Al,
Thanks for joining up. I am getting interested in the bandsaw power feeder. I can see it being a big help in re-sawing, and like your approach to the design, especially the power source.
You have a pretty big bandsaw with a huge table in your re-saw video. The Shopsmith bandsaw is an 11" model, and even my larger 14" bandsaw doesn't have a huge table. It looks like the feeder holder is the big part there, and the feeder itself not too huge. Have you installed any of these on smaller bandsaws?
Thanks for joining up. I am getting interested in the bandsaw power feeder. I can see it being a big help in re-sawing, and like your approach to the design, especially the power source.
You have a pretty big bandsaw with a huge table in your re-saw video. The Shopsmith bandsaw is an 11" model, and even my larger 14" bandsaw doesn't have a huge table. It looks like the feeder holder is the big part there, and the feeder itself not too huge. Have you installed any of these on smaller bandsaws?
Ed from Rhode Island
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER