10E with speed changer, spt mount, jointer, bandsaw +++ = a real bargain!!!
Canada I assume?
Heads Up - Bargain 'available'
Moderator: admin
-
JPG
- Platinum Member
- Posts: 35066
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Heads Up - Bargain 'available'
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Heads Up - Bargain 'available'
Includes the tallest ever aux Jointer fence. But what is this, circled in red? Part of the Model 10, or no?
- B634E3CA-FB1D-4998-BA3B-488D0FC02EA6.jpeg (131.69 KiB) Viewed 4121 times
- David
Re: Heads Up - Bargain 'available'
Not a Model 10 part. It looks like some kind of home made adapter to clamp to the way tubes.
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Eagle's Lair Woodshop
Hooper, UT
-
edflorence
- Platinum Member
- Posts: 646
- Joined: Thu Jul 20, 2006 8:14 pm
- Location: Idaho Panhandle
Re: Heads Up - Bargain 'available'
It looks like it might be a shop-made steady rest as shown in the older versions of PTWFE. If so, then the bearings that the spindle turning pushes against are on the end of the part that is farthest from the camera.
Ed
Idaho Panhandle
Mark 5 of various vintages, Mini with reversing motor, bs, dc3300, jointer, increaser, decreaser
Idaho Panhandle
Mark 5 of various vintages, Mini with reversing motor, bs, dc3300, jointer, increaser, decreaser
Re: Heads Up - Bargain 'available'
Ontario is a city north of San Diego and midway between L.A. and Riverside. It has one of the major airports that people sometimes use to avoid using LAX, the huge L.A. airport.
Being still a novice on these things I couldn’t tell for sure if it was a 10E but because of the wing nuts on the end stock I thought it might be. The depth adjusting knob on the jointer looks to be from a newer model 620 than mine. I wonder what they would have been jointing with such a wide fence?
Marc Jones
Model 10ER (1952), s/n: 72883 (MickyD restored in 2009/10) / Variable Speed Changer / A-34 Jigsaw / Jointer-Shaper Fence
Mark 5 Model 500 (1955), s/n: 309828 (MickyD restored in 2008/09) / Magna Jigsaw Model 610, s/n 65001 / Yuba 11” Bandsaw Model 630, s/n 39807 / Magna Jointer Model 620, s/n 17792 (restored in 2021) / Magna 6” Belt Sander Model 640, s/n 13742 (to be restored)
Professional Planer Model M5082, s/n 003918
DC3300 Dust Collector (circa 1998)
Model 10ER (1952), s/n: 72883 (MickyD restored in 2009/10) / Variable Speed Changer / A-34 Jigsaw / Jointer-Shaper Fence
Mark 5 Model 500 (1955), s/n: 309828 (MickyD restored in 2008/09) / Magna Jigsaw Model 610, s/n 65001 / Yuba 11” Bandsaw Model 630, s/n 39807 / Magna Jointer Model 620, s/n 17792 (restored in 2021) / Magna 6” Belt Sander Model 640, s/n 13742 (to be restored)
Professional Planer Model M5082, s/n 003918
DC3300 Dust Collector (circa 1998)
-
JPG
- Platinum Member
- Posts: 35066
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Heads Up - Bargain 'available'
Edge jointing wide boards.Majones1 wrote: ↑Thu Oct 21, 2021 9:24 amOntario is a city north of San Diego and midway between L.A. and Riverside. It has one of the major airports that people sometimes use to avoid using LAX, the huge L.A. airport.
Being still a novice on these things I couldn’t tell for sure if it was a 10E but because of the wing nuts on the end stock I thought it might be. The depth adjusting knob on the jointer looks to be from a newer model 620 than mine. I wonder what they would have been jointing with such a wide fence?
The rip fence tells the 10E tale also.
Noticed the pulleys are not installed correct for the speed changer.
Wonder how the bandsaw is connected to the drive shaft???
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
-
BuckeyeDennis
- Platinum Member
- Posts: 3727
- Joined: Tue Jul 24, 2012 10:03 pm
- Location: Central Ohio
Re: Heads Up - Bargain 'available'
It looks like it has the special pulley that accepts a drive coupler.
- Pulley.PNG (1.57 MiB) Viewed 4019 times
However, the shafts don't line up because, I believe, the bandsaw is supposed to be used with SPT Adapter "B", not Adapter "A" as shown in the photo (and mounted backwards). Which makes me wonder if Adapter "B" is lurking nearby. I've been watching CL for those adapters for years. One of them once showed up locally, but disappeared before I could get to it.
- Adapter B.PNG (27.53 KiB) Viewed 4019 times
-
JPG
- Platinum Member
- Posts: 35066
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Heads Up - Bargain 'available'
My 'comment' was alluding to the distance (vertical) between the drive hub and the bandsaw hub.
I wondered about which adapter was necessary.
I wondered about which adapter was necessary.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Heads Up - Bargain 'available'
Kinda like this…I've been watching CL for those adapters for years. One of them once showed up locally, but disappeared before I could get to it.
- D81F2750-C727-47F4-875A-F80A4B31EB2D.jpeg (409.62 KiB) Viewed 3990 times
Re: Heads Up - Bargain 'available'
Leave A adapter backwards, flip 180 degrees and lower bandsaw in A adapter. Problem solved.However, the shafts don't line up because, I believe, the bandsaw is supposed to be used with SPT Adapter "B", not Adapter "A" as shown in the photo (and mounted backwards).