My Growth Rings with Scott Markwood
SHOP NOTES: This is my entry in a contest to build an object for an 8 foot long 2X4. My entry was a Shaker-inspired table known as a candle stand. (More below)
Visit http://www.MyGrowthRings.com
Follow on Instagram @MyGrowthRings
I also blog at http://www.tool-hunter.com/shopsmith-posts and http://shopsmith-tool-hunter.blogspot.com/
Products used in this video (in no particular order):
This table is based on a design I came up with twenty years ago while I was working as the Academy Instructor at the Shopsmith factory showroom Academy in Dayton Ohio. Back then we were making a similar table in our "Fundamentals of Woodworking" class because, as you will notice, it utilizes quite a number of tools, and Shopsmith tools were excellent for this task.
One issue that the original Shaker design has was that the dovetail connection between the legs and the post were required skills that require a bit of practice, and we just didn't have that kind of time during our three-day class. So, I came up with the idea of producing a hexagonal post that provided us with straightforward locations for the legs without the need for hand-sculpting at the connection point.
If you saw my "White Whale" video you might be wondering if I ever found it, and the short answer is yes, but the long answer is it didn't make it into my final table.
It took two attempts to make my project, not because of the project itself, but because I was plagued with camera problems, and my "White Whale" board was used in the making of that first, unused table. It seemed like every time I completed a task and reviewed the footage the camera either had run out of memory, battery power, or on at least one occasion I forgot to hit the record button!
Finally, I mention Jimmy DiResta in this video. I am a HUGE Jimmy DiResta fan and am only poking fun at a comment he made in a recent episode of the Makin It podcast where he did a little playful mocking of the Shopsmith tools.
DISCLAIMER:
A few viewers have requested I provide affiliate links to help them find the products I use and as a way of supporting the channel through commission. If you purchase a product or service with the links I provide, there is no additional charge to you. As an Amazon Associate and an eBay affiliate, I may earn a commission from qualifying purchases. I always recommend shopping around for a better price. Thank you for supporting My Growth Rings!
The tools I used to construct this table were:
0:20 - Bosch GCM12SD 12 In. Dual-Bevel Glide miter saw for rough crosscutting
0:41 - Shopsmith bandsaw to resaw 2X4 into thinner boards
1:09 - DeWalt DW735 13" planer
1:18 - Bosch Dual-Bevel Glide chopsaw for crosscutting and mitering legs
2:19 - Shopsmith jointer
2:31 - Shopsmith bandsaw to pad-saw the legs
2:46 - Shopsmith Mark V as a horizontal boring machine to join tabletop
3:20 - Jorgensen bar clamps to join top
3:36 - Back to the Shopsmith bandsaw to prep legs for dovetailing (Oops, this is a little out of order!)
3:48 - Shopsmith drill press with the drum sander to smooth legs
3:54 - Shopsmith Mark V as a table saw to shape spindle
4:27 - Bosch Dual-Bevel Glide chop saw to trim spindle to final length
4:55 - JessEm 03200 Bench Top Router table to cut dovetails on legs and into the spindle
5:38 - Back to the Shopsmith bandsaw to trim dovetails on legs
6:26 - Shopsmith bandsaw to cut top round
6:41 - Shopsmith 12" disc sander to smooth and make top perfectly round
6:51 - Shopsmith lathe to turn post to shape
7:21 - Shop-built router table to round-over edges on legs, top, and support
7:34 - Porter-Cable 1/4 sheet palm sander to smooth all surfaces
8:21 - Shopsmith Mark V as a drill press on the table support