My Growth Rings with Scott Markwood
SHOP NOTES:
DON'T MISS THE WARNING AT THE END OF THE VIDEO! Well, it took an entire week to get here, but we are finally applying a couple rust-preventative treatments on my Shopsmith jointer. Since we first talked about this I have expanded from my original pan of applying a 50/50 blend of oil-based polyurethane and mineral spirits to doing a test of that, as well as water-based poly AND an interesting product called "Penetrol". Regardless of the topcoat used I always use some form of wax as the sacrificial surface and to keep the tables slick. In our mid-week follow-up episode of STUMPED? Q&A we'll talk more about these products and apply a couple of them.
0:00 - Intro
1:04 - Isn't the mineral spirits going to be a problem?
1:53 - But it would be a problem with H2O-Based Poly
2:04 - Have you tried Penetrol?
2:50 - Let's test them ALL!
4:13 - Applying the Poly, the H2O-Based Poly, and the Penetrol
5:05 - An IMPORTANT WARNING!
Visit http://www.MyGrowthRings.com
Follow on Instagram @MyGrowthRings
I also blog at http://www.tool-hunter.com/shopsmith-posts and http://shopsmith-tool-hunter.blogspot.com/
Disclaimer/Disclosure:
A few viewers have requested I provide affiliate links to help them find the products I use and as a way of supporting the channel through commission. If you purchase a product or service with the links I provide, there is no additional charge to you. As an Amazon Associate and an eBay affiliate, I may earn a commission from qualifying purchases. I always recommend shopping around for a better price. Thank you for supporting My Growth Rings!
#PolyurethaneJointer #Penetrol #RustPrevention