My Growth Rings with Scott Markwood

[Chad]

146.jpg (22.44 KiB) Viewed 3177 times

My Growth Rings with Scott Markwood

Watch it here: https://youtu.be/0RmS9os_IZQ

SHOP NOTES: My winnings in the Jimmy DiResta giveaway could be your winnings! I'm going to select SEVEN people from that list who will receive one of the following random gifts:

One viewer will get a DiResta plastic injection molded keychain
One viewer will get a DiResta leather keychain
One viewer will get a DiResta baseball cap
One viewer will get a different DiResta baseball cap (I guess they are both different, aren't they?)
One viewer will get a DiResta knit cap
One viewer will get a DiResta embroidered patch
One viewer will get a different DiResta embroidered patch (Don't start that again!)

How do you enter? Sign up for the MyGrowthRings "Mailing list" at the following link before Sunday, at 6PM Eastern time, Feb 20, 2022: http://eepurl.com/gvyMUz

Hey, while you're here, I have an idea: If you aren't ready or able to join the channel, you can always support the channel by watching, clicking the thumbs-up, commenting, sharing, and by clicking through the provided links whenever you are shopping on Amazon or eBay. You don't even need to purchase the items these links lead to, but by going through these links they'll reward us with a small "finders fee". Thanks in advance for the support!

Be sure to check out Jimmy's channel here: https://www.youtube.com/c/jimmydiresta

And thanks again, Jimmy!

Visit http://www.MyGrowthRings.com
Follow on Instagram @MyGrowthRings
I also blog at http://www.tool-hunter.com/shopsmith-...
and http://shopsmith-tool-hunter.blogspot...

#DirestaGiveaway #MyGrowthRings #SomeHeadsShouldntWearHats

[Chad]

147.jpg (22.75 KiB) Viewed 3174 times

My Growth Rings with Scott Markwood

Watch it here: https://youtu.be/b0udB4y7FHg

SHOP NOTES: I'm at WorkBenchCon this weekend and having a great time playing with new tools and learning from suppliers and Youtube content creators. So far the coolest tool I've discovered is the new portable pocket hole jig from Kreg that makes drilling pocket holes on wide sheet stock (plywood, melamine, etc.) a breeze! It's available in a couple kits, including one kit that allows it to be mounted to a base for use in narrow stock, such as for making face frames. Check out a couple of them at Amazon:

This is the basic, hand-held version of the Kreg 520Pro: https://amzn.to/3HldZJh
This version of the Kreg 520Pro includes the "Docking Station": https://amzn.to/3taRUIt
I suppose this is the "Whole Enchilada" version! It includes the Kreg 520PRO Pocket-Hole Jig and the Docking Station AND a SK04 Starter Pocket Hole Screw Kit: https://amzn.to/3t9qG54

Here's the original KREG 520Pro intro video: https://youtu.be/Vvm7eVVyxi4

Here's an idea: If you aren't ready or able to join the channel, you can always support the channel by watching, clicking the thumbs-up, commenting, sharing, and by clicking through the provided links whenever you are shopping on Amazon or eBay. You don't even need to purchase the items these links lead to, but by going through these links they'll reward us with a small "finders fee". Thanks in advance for the support!

Visit http://www.MyGrowthRings.com
Follow on Instagram @MyGrowthRings
I also blog at http://www.tool-hunter.com/shopsmith-...
and http://shopsmith-tool-hunter.blogspot...

A few viewers have requested I provide affiliate links to help them find the products I use and as a way of supporting the channel through commission. If you purchase a product or service with the links I provide, there is no additional charge to you. I always recommend shopping around for a better price. Thank you for supporting My Growth Rings! Scott

#KregJig #Kreg520Pro #WorkBenchCon2022

[Chad]

148.jpg (24.16 KiB) Viewed 3172 times

My Growth Rings with Scott Markwood

Watch it here: https://youtu.be/rboI7qTKgOs

SHOP NOTES: That's right, your Shopsmith has a hair trigger that ideally you'll be able to avoid, but if your quill return spring breaks or if the depth gauge gets out of alignment, you might not have a choice but to tempt fate. Ok, I'm being overly dramatic. Yes, you do need to approach this carefully, but it's totally doing about and you've got this!

Please consider joining the 130+ other channel members in supporting the channel and get access to perks: https://www.youtube.com/channel/UCGsm...

Here's an idea: If you aren't ready or able to join the channel, you can always support the channel by watching, clicking the thumbs-up, commenting, sharing, and by clicking through the provided links whenever you are shopping on Amazon or eBay. You don't even need to purchase the items these links lead to, but by going through these links they'll reward us with a small "finders fee". Thanks in advance for the support!

Here are links to a few of the products I used or discussed in this video:
My favorite 9" long T-handle "Shopsmith Toolbox" 5/32" Hex Wrench: https://amzn.to/3sm3NcJ

This video from Jacob Anderson covers a bit more about replacing the quill return spring: https://youtu.be/YbHVTwSp9DI

In this video is from Mike, from the Shopsmith forums, Mike is replacing the quill return spring on a 1940's-50's 10ER. While the techniques aren't exactly the same, many of his tips are totally transferable to modern Shopsmith tools: https://youtu.be/S66Lf9VAjnA

Visit http://www.MyGrowthRings.com
Follow on Instagram @MyGrowthRings
I also blog at http://www.tool-hunter.com/shopsmith-...
and http://shopsmith-tool-hunter.blogspot...

A few viewers have requested I provide affiliate links to help them find the products I use and as a way of supporting the channel through commission. If you purchase a product or service with the links I provide, there is no additional charge to you. I always recommend shopping around for a better price. Thank you for supporting My Growth Rings! Scott

#Shopsmith #QuillReturnSpring #ShopsmithDeathTrap

[Chad]

149.jpg (23.72 KiB) Viewed 3172 times

My Growth Rings with Scott Markwood

Watch it here: https://youtu.be/cB5KwFVeQFs

SHOP NOTES: This is the follow-up to an earlier video to talk about the Questions, Comments, and Cheap-shots that came from our discussion about a set screw that can break your heart as a Shopsmith power tool owner. If you missed that vid, be sure to catch it here: https://youtu.be/rboI7qTKgOs

Please note that this video will remain visible for roughly ONE WEEK, and at which point it will become Member-Only. Please consider joining the 100+ other channel members in supporting the channel and get access to perks: https://www.youtube.com/channel/UCGsm...

Here's an idea: If you aren't ready or able to join the channel, you can always support the channel by watching, clicking the thumbs-up, commenting, sharing, and by clicking through the provided links whenever you are shopping on Amazon or eBay. You don't even need to purchase the items these links lead to, but by going through these links they'll reward us with a small "finders fee". Thanks in advance for the support!

Here are links to a few of the products I used or discussed in this video:
My favorite 9" long T-handle "Shopsmith Toolbox" 5/32" Hex Wrench: https://amzn.to/3sm3NcJ
Here's a good deal on a batch of small and handy Rare Earth Magnets: https://amzn.to/3MsiTrI
Shopsmith "Help Kit": https://www.shopsmith.com/ownersite/c...
Stainless Steel replacement set screws for your Shopsmith Mark V: https://amzn.to/3gtafKR NOTE that these SS set screws have CUPPED tips, so they will need to be flattened.

This is the video that Jim McCann recorded for Dan: https://youtu.be/npz1SvLFJTs
Here's Marc's clever video on how to remove the quill shaft on a PowerPro headstock: https://youtu.be/qPLGHNetA0g
Here's Marc's clever video on how to re-install the quill shaft on a PowerPro headstock: https://youtu.be/c8wHP7XM2yM

A few viewers have requested I provide affiliate links to help them find the products I use and as a way of supporting the channel through commission. If you purchase a product or service with the links I provide, there is no additional charge to you. I always recommend shopping around for a better price. Thank you for supporting My Growth Rings! Scott

#Shopsmith #SetScrews #SetScrewQandA

[Chad]

150.jpg (22.4 KiB) Viewed 3162 times

My Growth Rings with Scott Markwood

Watch it here: https://youtu.be/d51M_KhEjmQ

SHOP NOTES: Quite a while ago I purchased an aftermarket quill lever set for my Mark V and for the most part I like it, but it also has issues. This Shopsmith-produced aftermarket quill lever solves some of the issues I had with the stock lever, but is it good enough? We'll see.
If you missed it, here's the video where I showed the other aftermarket quill lever: https://youtu.be/OjycnglIlBM

Please consider joining the 130+ other channel members in supporting the channel and get access to perks: https://www.youtube.com/channel/UCGsm...

Here's an idea: If you aren't ready or able to join the channel, you can always support the channel by watching, clicking the thumbs-up, commenting, sharing, and by clicking through the provided links whenever you are shopping on Amazon or eBay. You don't even need to purchase the items these links lead to, but by going through these links they'll reward us with a small "finders fee". Thanks in advance for the support!

Here are links to a few of the products I used or discussed in this video:
My favorite 9" long T-handle "Shopsmith Toolbox" 5/32" Hex Wrench: https://amzn.to/3sm3NcJ
Here's the Shopsmith 10-Position Quick-Index Quill Feed Handle on Amazon:https://amzn.to/35SFPjb
Here's the Shopsmith 10-Position Quick-Index Quill Feed Handle on Shopsmith's site: https://shopsmith.com/ownersite/catal...
Geoffrey Baker's Purple "Quick Release Quill Feed Handle Kit" available through his eBay account https://ebay.us/UtgBte Note, he doesn't always have his handles listed, so check back often.

Visit http://www.MyGrowthRings.com
Follow on Instagram @MyGrowthRings
I also blog at http://www.tool-hunter.com/shopsmith-...
and http://shopsmith-tool-hunter.blogspot...

A few viewers have requested I provide affiliate links to help them find the products I use and as a way of supporting the channel through commission. If you purchase a product or service with the links I provide, there is no additional charge to you. I always recommend shopping around for a better price. Thank you for supporting My Growth Rings! Scott

#Shopsmith #MagneticQuillLever #ShopsmithUpgrade

[Chad]

My Growth Rings with Scott Markwood

SHOP NOTES: The Shopsmith power coupler is been the driving bandsaws, jointers and more since the 1950's, and though it's gone through several changes the product has been pretty much dialed-in for over 50 years. Yes, it's a "weak link", but it's totally by design, and oh, what a design it is!

Here's an idea: If you aren't ready or able to join the channel, you can always support the channel by watching, clicking the thumbs-up, commenting, sharing, and by clicking through the provided links whenever you are shopping on Amazon or eBay. You don't even need to purchase the items these links lead to, but by going through these links they'll reward us with a small "finders fee". Thanks in advance for the support!

Here are links to a few of the products I used or discussed in this video:
My favorite 9" long T-handle "Shopsmith Toolbox" 5/32" Hex Wrench: https://amzn.to/3sm3NcJ
Here's the Shopsmith Power Coupler kit on Amazon: https://amzn.to/3L2FWYy

Visit http://www.MyGrowthRings.com
https://www.youtube.com/c/MyGrowthRings
Follow on Instagram @MyGrowthRings
I also blog at http://www.tool-hunter.com/shopsmith-posts and http://shopsmith-tool-hunter.blogspot.com/

A few viewers have requested I provide affiliate links to help them find the products I use and as a
way of supporting the channel through commission. If you purchase a product or service with the
links I provide, there is no additional charge to you. I always recommend shopping around for a
better price. Thank you for supporting My Growth Rings! Scott

[Chad]

My Growth Rings with Scott Markwood

SHOP NOTES: This is the follow-up to an earlier video to talk about the Questions, Comments, and Cheap-shots that came from our discussion about the Shopsmith Power Coupler. If you missed that vid, be sure to catch it here: https://youtu.be/Rrars8kR_T4

Please note that this video will remain visible for roughly ONE WEEK, and at which point it will become Member-Only.

For more information, please visit: https://www.youtube.com/c/MyGrowthRings/featured

Exclusive Underwriter gives you access to STUMPED Q&A videos
Access to the video Library of Questions, Comments, & Cheap-Shots from all past videos. All for about $2.00 a month. That's less than the cost of one issue of your favorite woodworking magazine.

Here's an idea: If you aren't ready or able to join the channel, you can always support the channel by watching, clicking the thumbs-up, commenting, sharing, and by clicking through the provided links whenever you are shopping on Amazon or eBay. You don't even need to purchase the items these links lead to, but by going through these links they'll reward us with a small "finders fee". Thanks in advance for the support!

Here are links to a few of the products I used or discussed in this video:
My favorite 9" long T-handle "Shopsmith Toolbox" 5/32" Hex Wrench: https://amzn.to/3sm3NcJ
Here's the Shopsmith Power Coupler kit on Amazon: https://amzn.to/3L2FWYy

Here's the video I mentioned whit testing of various DIY couplers, including a Print-On-Demand metal coupler from Shapeways: https://youtu.be/AvPtAOter4A

Visit http://www.MyGrowthRings.com
https://www.youtube.com/c/MyGrowthRings
Follow on Instagram @MyGrowthRings
I also blog at http://www.tool-hunter.com/shopsmith-posts
and http://shopsmith-tool-hunter.blogspot.com/

A few viewers have requested I provide affiliate links to help them find the products I use and as a way of supporting the channel through commission. If you purchase a product or service with the links I provide, there is no additional charge to you. I always recommend shopping around for a better price. Thank you for supporting My Growth Rings! Scott

[DLB]

My first two SPT couplers came with a '57 I bought in the early 80's. I broke one when I put my old bandsaw (with straight tube mounts) on a newer machine, IMO due to poor hub alignment (aka operator error ). The other I still use, I would guess both are original from late 50's. Both had that translucent look, I'm not sure when that changed.

While there is no doubt these will break at some amount of torque, I'm skeptical of that being an intentional safety feature. What hazard would be mitigated? The design has been the same since 3/4 HP machines. No change for a 50% power increase to 1-1/8 HP. And no change for PowerPro, which SS asserts produces twice the power at all speeds. Thinking mostly of the bandsaw and jointer, I don't see where a hard torque limit is a safety feature. And I suspect we'd be breaking them all the time if they were designed to break under conditions that the early machines could produce. Has anyone else broken one of these where safety was a factor? Or even broken one by exceeding the torque limit? What sort of conditions, and on what machine?

Note - I've read a thread or discussion where members felt PowerPros were contributing to an increased break rate for couplers. I don't think many felt this had to do with more power.

- David

[Chad]

David, My oldest coupler isn't from the '50's, but it is from 1980. It's been dropped onto the concrete floor of my workshop, kicked across the floor, has had a wood board set down on it, and I'm sure other "abuse"; more times than I can count, and all by accident, of course. But it refuses to die.

As far as safety of the machine; I've never stalled any of my Shopsmith mechanical headstocks with a SPT and the power coupler in use. Only while in table saw mode, once. So I can't say for sure torque would be a defiant cause of failure with any of the SPT's for me personally, except for maybe with the Mark mounted planer. I own and use one, but the situation hasn't happened where I've taken a extremely heavy cut, or hit a foreign object that was embedded in a board, or a extremely hard knot being planed. If it did fail do to that sort of operation, then I could see it being a safety factor to help protect the operator from personal injury. I've seen planer kickback first hand (not on a Shopsmith planer), and it will make your heart skip a beat or few.

Aside from maybe the button bearing on the control sheave, or wearing a area on the belts and control sheaves; I'm not sure what other components in a mechanical headstock could be damaged by a sudden jolted stall other than the motor. Like I mentioned when I stalled one of mine while in the table saw mode; no internal damage occurred that I'm aware of, and I was quick to flip the power switch off to keep from damaging the motor.

[Chad]

woodshop nerdery

This unlisted Woodshop Nerdery video is a response to comments and questions and general misunderstandings related to a comment I made on a recent MGR video.

https://www.youtube.com/c/woodshopnerdery