Just bought a Shopsmith Mark V
Moderators: HopefulSSer, admin
- JPG
- Platinum Member
- Posts: 34648
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Just bought a Shopsmith Mark V
The motor.pan can be dropped away from the upper casting when in drill press position. ALL is then revealed from the open 'bottom'.
A bit tricky making the motor belt separate from the motor pulley, but relatively easy.
Magna did use(and likely still does) Model 10's for production drill presses.
A bit tricky making the motor belt separate from the motor pulley, but relatively easy.
Magna did use(and likely still does) Model 10's for production drill presses.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Just bought a Shopsmith Mark V
I was actually thinking a multi head drill press. but I found this reference to a 12-1/2" benchtop drill that Everett found a manual for, I had forgotten this one.
viewtopic.php?p=250645#p250645
viewtopic.php?p=250645#p250645
Ron Dyck
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
Re: Just bought a Shopsmith Mark V
He is going to send me a photo of it, he did refer to is as Shop Smith and not Magna but I will share once I get the photo.
1955 Mark 5 Greene "A"
Needs Un-Gilmer'd and some love.
Needs Un-Gilmer'd and some love.
- chapmanruss
- Platinum Member
- Posts: 3500
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: Just bought a Shopsmith Mark V
Below is a picture of the cover of the Manual for the Magna 12-1/2" Drill Press Model 730. It was part of the Magna Line tools which also included the Magna 9” Tilt Arbor Bench Saw, the Magna 12-1/2” Jig Saw, the Magna 30” Wood Lathe, the Magna 4” Belt Sander and the Magna 10” Contractors Saw. These tools were not as popular as the Shopsmith Mark 5 being made at the same time in the 1950's so few are ever found for sale.
_ .
This is a case in the confusion of the use of the names Magna and Shopsmith. Shopsmith originally was the name of the first 5 in 1 tool the Shopsmith Model 10E and was made by Magna Engineering Corporation. The Model 10ER followed and was later discontinued when the Shopsmith Mark 5 was introduced by Magna Engineering Corporation. Until Shopsmith Inc. was formed in 1972 to continue the tool line, Magna tools were a separate name from the Shopsmith Tools of the Model 10's and Mark series tools. Even the early SPT's which were called Add-a-Tools were Magna Tools not Shopsmith. Another reason for this name confusion is demonstrated on the cover of the Magna Drill Press shown above having the Shopsmith logo next to the Magna logo and their similarities.
_ .
This is a case in the confusion of the use of the names Magna and Shopsmith. Shopsmith originally was the name of the first 5 in 1 tool the Shopsmith Model 10E and was made by Magna Engineering Corporation. The Model 10ER followed and was later discontinued when the Shopsmith Mark 5 was introduced by Magna Engineering Corporation. Until Shopsmith Inc. was formed in 1972 to continue the tool line, Magna tools were a separate name from the Shopsmith Tools of the Model 10's and Mark series tools. Even the early SPT's which were called Add-a-Tools were Magna Tools not Shopsmith. Another reason for this name confusion is demonstrated on the cover of the Magna Drill Press shown above having the Shopsmith logo next to the Magna logo and their similarities.
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Re: Just bought a Shopsmith Mark V
I grabbed the manual from your link and I am going to send it to him to see if its a match.
Thanks for the info Russ
Thanks for the info Russ
1955 Mark 5 Greene "A"
Needs Un-Gilmer'd and some love.
Needs Un-Gilmer'd and some love.
Re: Just bought a Shopsmith Mark V
This fella helped me really understand the greenie since I work better off of visuals.
No videos posted for 8 months and his shop domain name has been parked, does not look like he is in business any longer maybe.
Poly V belt = Serpentine belt for a car guy like me 8)
He actually says if you have a new front bearing on the quill and new bearings on the drive sleeve, the quill will be solid.
https://www.youtube.com/watch?v=drv2C1lYtC4
No videos posted for 8 months and his shop domain name has been parked, does not look like he is in business any longer maybe.
Poly V belt = Serpentine belt for a car guy like me 8)
He actually says if you have a new front bearing on the quill and new bearings on the drive sleeve, the quill will be solid.
https://www.youtube.com/watch?v=drv2C1lYtC4
1955 Mark 5 Greene "A"
Needs Un-Gilmer'd and some love.
Needs Un-Gilmer'd and some love.
- chapmanruss
- Platinum Member
- Posts: 3500
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: Just bought a Shopsmith Mark V
It is my understanding that Jacob Anderson has retired from servicing Shopsmith Tools.
The Statement
The Statement
That could be true, but it would require a very snug fit between the splined end of the Quill Assembly going into the Drive Sleeve Assembly. A loose fit would create some wobble that would be carried out to the spindle end of the Quill. A double bearing Quill helps eliminate that wobble by creating a truer turning Spindle supported at two points inside the Quill Sleave. Using a double bearing Quill Assembly is more important in the Poly V Drive because of the use of part number 514083 called the Drive & Ring which is the nylon part attached to the end of the Drive Sleeve Assembly that actually has the mating splines for the Quill Assembly which can wear faster than the Gilmer Drive parts. The nylon cap was added to the end of the Drive Sleeve on later Gilmer Drive units to reduce noise. The splines are in the Drive Sleeve Assembly's metal Sleeve for the Gilmer Drive.He actually says if you have a new front bearing on the quill and new bearings on the drive sleeve, the quill will be solid.
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Re: Just bought a Shopsmith Mark V
I could see the mesh of the splines having gap would still have a bit of run out to your point.chapmanruss wrote: ↑Thu Jul 07, 2022 2:21 pm It is my understanding that Jacob Anderson has retired from servicing Shopsmith Tools.
The Statement
That could be true, but it would require a very snug fit between the splined end of the Quill Assembly going into the Drive Sleeve Assembly. A loose fit would create some wobble that would be carried out to the spindle end of the Quill. A double bearing Quill helps eliminate that wobble by creating a truer turning Spindle supported at two points inside the Quill Sleave. Using a double bearing Quill Assembly is more important in the Poly V Drive because of the use of part number 514083 called the Drive & Ring which is the nylon part attached to the end of the Drive Sleeve Assembly that actually has the mating splines for the Quill Assembly which can wear faster than the Gilmer Drive parts. The nylon cap was added to the end of the Drive Sleeve on later Gilmer Drive units to reduce noise. The splines are in the Drive Sleeve Assembly's metal Sleeve for the Gilmer Drive.He actually says if you have a new front bearing on the quill and new bearings on the drive sleeve, the quill will be solid.
I have been taking my Jointer apart and cleaning it up. The bearings are noisy. I am waiting for the Puller so I can Identify them enough to order some new Boca Bearings for it. I may also pull the drive sleeve and Quill bearings and order those too to test the theory.
I will also be ordering the upgrade parts as well so I have them if testing goes bad.
1955 Mark 5 Greene "A"
Needs Un-Gilmer'd and some love.
Needs Un-Gilmer'd and some love.
Re: Just bought a Shopsmith Mark V
Just thinking out loud.... If you added a 2 bearing Quill and there was play in the splines and or drive bearings, you could still have wobble / run out?
1955 Mark 5 Greene "A"
Needs Un-Gilmer'd and some love.
Needs Un-Gilmer'd and some love.
Re: Just bought a Shopsmith Mark V
In my opinion if you have a good two bearing quill with all good parts it will exhibit very low runout. (Generally less than 0.001" in my experience.) Extreme error elsewhere may cause earlier failure of the quill bearings, but I think that is more hypothetical than real. And would likely present itself in some other way.
Woodshop Nerdery (youtube) reported on a new Mark 7 with what he felt was a bad from the factory quill: https://www.youtube.com/watch?v=HEFFYw29yV4 So yes, it happens.
The current version quill that SS sells has a one piece spindle and larger bearings than the version Skip referred to in his video. I'm not suggesting it is necessarily or significantly better, these aren't the only changes. IIUC the current version has been around for 10+ years.
- David