Good morning,
I’m looking at a used lathe duplicator and have a couple of questions.
I see on the Shopsmith site that is not currently available, and that the some cutters are also not available. Any ideas/suggestions on getting cutters (new, replacement or substitutions)?
Also the current part number for the duplicator is 555638, the one I’m looking at is I believe 555209 which is no longer listed. Any ideas on what the difference is between these two?
Thanks
Lathe duplicator questions
Moderator: admin
-
chapmanruss
- Platinum Member
- Posts: 4538
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: Lathe duplicator questions
There are different frame parts between the "old" and "new" Lathe Duplicators. The picture in the online catalog shows the "old" frame of the Lathe Duplicator.
I don't know the reason most of the cutters are no longer available.
I don't know the reason most of the cutters are no longer available.
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's, 2 Power Stations & Crafter's Station
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's, 2 Power Stations & Crafter's Station
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored.