My Model 10-ER Journey

Forum for Maintenance and Repair topics. Feel free to ask questions or contribute.

Moderator: admin

User avatar
JPG
Platinum Member
Posts: 35029
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Re: My Model 10-ER Journey

Post by JPG »

If that glue is "distic" a lacquer/whatever based glue stick that is really really difficult to remove. Try various stuff to dissolve.
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Real1shepperd
Gold Member
Posts: 56
Joined: Sat Nov 19, 2022 2:36 pm

Re: My Model 10-ER Journey

Post by Real1shepperd »

This is interesting because I have two large steel discs that I laminate grit to for sharpening sheep shearing blades. The adhesive is gray and looks like epoxy, but it loosens quite easily with water submersion. That 'distic' sounds like it takes a chem to get off. I wonder why they made that so difficult. The adhesive I used on my steel wheels has been around for at least 40 years, possibly longer.

Oh well, once you get this stuff off, you only deal with self-stick discs. I'd try acetone and if that doesn't work, MEK. The old 10E/10ER disc I bought online had some adhesive remnants. I used an air tool with disposable Scotch pads and it zipped it all off.

Kevin
User avatar
JPG
Platinum Member
Posts: 35029
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Re: My Model 10-ER Journey

Post by JPG »

Distic is made 'fluid' initially by the heat caused by friction when rubbed against the spinning disc. Perhaps heat will ease the effort. Later adhesive was a latex based liquid fast drying contact cement.
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Real1shepperd
Gold Member
Posts: 56
Joined: Sat Nov 19, 2022 2:36 pm

Re: My Model 10-ER Journey

Post by Real1shepperd »

Did "Distic" come in a stick form? I ask because the 10E I bought for a friend has a stick of something or other in a drawer....

Kevin
jpdalton
Gold Member
Posts: 431
Joined: Sun Jun 12, 2011 7:36 am

Re: My Model 10-ER Journey

Post by jpdalton »

Real1shepperd wrote: Sat Oct 12, 2024 11:29 am Did "Distic" come in a stick form?
It sure did!
IMG_4900.jpeg
IMG_4900.jpeg (191.54 KiB) Viewed 215 times
John Dalton
Massachusetts
*****************************************
1948 10E, S/N 5052 (restored)
1950 10ER, S/N 26473 (restored)
1952 10ER, S/N 51721e (restored as dedicated drill press)
1954 Mark 5, S/N 263705 (restored/PowerPro)
c1957 Magna-Line Model 710 Bench Saw, S/N 34162 (restored)
MichaelCfffg
Gold Member
Posts: 30
Joined: Fri Sep 27, 2024 2:55 pm

Re: My Model 10-ER Journey

Post by MichaelCfffg »

Really good information on your post, Kevin, especially about the bearings and the sanding disk. It will go into a bucket of water tomorrow. Thank you!

I've got too many irons in the fire right now (pretty much always), so I've been pulled away from the Shopsmith project for a while. As soon as I can get back into it I'll be back on this thread with updates.
Mike Chambers
Franklin County, Missouri

1952 10ER, S/N 59677 (A work in process!)
Post Reply