scroll saw mounting on shopsmith

tbergh · Post by **tbergh** » Thu Feb 26, 2009 11:29 pm

anyone able to help dose thw power coupler go on the top auxilary power shaft or the bottom one that says planer and jointer only very confused on the shaft it needs to be hooked up too manual is not very helpful:eek:

thanks thad

curiousgeorge · Post by **curiousgeorge** » Fri Feb 27, 2009 12:58 am

well lets see now thad i dont own a shopsmith scroll saw but if the lower shaft says planer and jointer only i would guess that it would go to the top shaft

reible · Post by **reible** » Fri Feb 27, 2009 1:42 am

Hi,

Some times a picture is worth a 1000 words but in this case you might want to just look at this chapter in the online PTWFE which can be found at:
http://www.shopsmith.com/academy/scrollsaw/index.htm#setup

Figure 15-1 (You can click it to enlarge it)

(In case you just want the simple answer it mounts to the lower output).

Ed

JPG · Post by **JPG** » Sun Mar 01, 2009 8:19 pm

reible wrote:Hi,

Some times a picture is worth a 1000 words but in this case you might want to just look at this chapter in the online PTWFE which can be found at:
http://www.shopsmith.com/academy/scrollsaw/index.htm#setup

Figure 15-1 (You can click it to enlarge it)

(In case you just want the simple answer it mounts to the lower output).

Ed

KUDOSEd

RED:)

tbergh · Post by **tbergh** » Mon Mar 02, 2009 9:28 pm

thqnks for the help and also how hard is it to get a trip sander sander belt would rocklers have the belt and hoe long is the sander belt

thanks thad;)

JPG · Post by **JPG** » Tue Mar 03, 2009 1:40 am

[quote="tbergh"]thqnks for the help and also how hard is it to get a trip sander sander belt would rocklers have the belt and hoe long is the sander belt

thanks thad]
They are 42" x 1"(or 1/2"). SS sells them and they ARE reasonable!

tbergh · Post by **tbergh** » Tue Mar 03, 2009 1:29 pm

thanks for the info which grits are the best for most woodworking
thanks thad

JPG · Post by **JPG** » Tue Mar 03, 2009 1:33 pm

tbergh wrote:thanks for the info which grits are the best for most woodworking
thanks thad

Start with the assorted set(s). Then YOU can decide which is best for what YOU do. The finer grits are normally used for sharpening.

alisfair · Post by **alisfair** » Sun Jul 07, 2013 11:23 pm

I have a chance to purchase a stand alone scroll saw for 200. Looks to be in excellant condition. Are you saying they will no longer be made? I thought this may be a great purchase but now I am wondering. Any info would be appreciated.
Thanks,
alisfair

alisfair · Post by **alisfair** » Sun Jul 07, 2013 11:23 pm

I have a chance to purchase a stand alone scroll saw for 200. Looks to be in excellant condition. Are you saying they will no longer be made? I thought this may be a great purchase but now I am wondering. Any info would be appreciated.
Thanks,
alisfair

Shopsmith Forums

scroll saw mounting on shopsmith

scroll saw mounting on shopsmith

20 in scroll saw

20 in scroll saw