Simple project advice

Forum for people who are new to woodworking. Feel free to ask questions or contribute.

Moderator: admin

Post Reply
RFGuy
Platinum Member
Posts: 2992
Joined: Mon Dec 31, 2018 8:05 am
Location: a suburb of PHX, AZ

Re: Simple project advice

Post by RFGuy »

It looks good, especially with the painting. I agree with her...
📶RF Guy

Mark V 520 (Bought New '98) | 4" jointer | 6" beltsander | 12" planer | bandsaw | router table | speed reducer | univ. tool rest
Porter Cable 12" Compound Miter Saw | Rikon 8" Low Speed Bench Grinder w/CBN wheels | Jessem Clear-Cut TS™ Stock Guides
Festool (Emerald): DF 500 Q | RO 150 FEQ | OF 1400 EQ | TS 55 REQ | CT 26 E
DC3300 | Shopvac w/ClearVue CV06 Mini Cyclone | JDS AirTech 2000 | Sundstrom PAPR | Dylos DC1100 Pro particulate monitor
Top
User avatar
edflorence
Platinum Member
Posts: 679
Joined: Thu Jul 20, 2006 8:14 pm
Location: Idaho Panhandle

Re: Simple project advice

Post by edflorence »

Very good looking frame!
Ed
Idaho Panhandle
Mark 5 of various vintages, Mini with reversing motor, bs, dc3300, jointer, increaser, decreaser
Top
RonKlein
Gold Member
Posts: 100
Joined: Mon Jul 24, 2006 11:37 pm
Location: Santa Clarita, CA

Re: Simple project advice

Post by RonKlein »

You might consider a clear finish. Something to protect the wood. It doesn't take much to leave smudges or stains on bare wood like that. Maybe a semi-gloss poly, shellac, or even a good coat of wax.
Ron--K6VPV
510, upgraded to 520, now PowerPro, bandsaw, jointer, belt sander, jointmatic, scroll saw, strip sander, pro planer, OPR, DC3300, and more.
Top
kas20amc02
Gold Member
Posts: 38
Joined: Tue Jan 21, 2025 7:58 pm

Re: Simple project advice

Post by kas20amc02 »

That’s a good looking picture frame. I doubt mine will be that precise.
Total rookie - advice welcome

Inherited Shop Smith 510
Delta 1/3 HP combo belt/disc sander
10" folding Craftsman miter saw
Grizzly G0803Z 9" band saw
Bosch 2.25 HP router
Dewalt orbital sander + Ryobi mouse sander
Top
Matanuska
Gold Member
Posts: 217
Joined: Sun Jan 02, 2022 8:07 pm
Location: Dallas, Texas

Re: Simple project advice

Post by Matanuska »

RonKlein wrote: ↑Mon Jul 14, 2025 7:03 pm You might consider a clear finish. Something to protect the wood. It doesn't take much to leave smudges or stains on bare wood like that. Maybe a semi-gloss poly, shellac, or even a good coat of wax.
+1
- Matanuska

1984 Mark V upgraded to 520 PowerPro. Shopsmith cast iron table bandsaw, jointer, belt sander, and 60's vintage 610 jigsaw SPT's. Makita 2040 15" planer, JessEm Mast-R-Lift II router table.
Top
Post Reply

Return to “Beginning Woodworking”