If anyone is interested, I've just finished a set of plans for a wall hanging gun rack, with room for 3 rifles and a set of shelves for handgun and/or ammunition storage.
Location
* Furniture > Gun Rack
.
New Offering 4/23/2009
Moderator: admin
-
tom_k/mo
- Platinum Member
- Posts: 856
- Joined: Mon Jul 14, 2008 3:58 pm
- Location: St. Louis, MO
- Contact:
New Offering 4/23/2009
ShopSmith MarkV-520 with Belt Sander, Jointer, Band Saw, Strip Sander, Scroll Saw and Biscuit Jointer SPTs and a DC-3300...
Woodworking Hobbyist (Check out all my Woodworking Plans (http://vbwhiz.isa-geek.net/plans)
Aspiring Sandcarver: Breaking glass one grain at a time.
Black Powder Shooter (love the smell of burning sulfur).
Woodworking Hobbyist (Check out all my Woodworking Plans (http://vbwhiz.isa-geek.net/plans)
Aspiring Sandcarver: Breaking glass one grain at a time.
Black Powder Shooter (love the smell of burning sulfur).
-
woodbender
- Silver Member
- Posts: 12
- Joined: Tue Apr 07, 2009 5:51 pm
woodbender wrote:Okay I'm an idiot.
I'm looking for a "Furniture" forum around here somewhere and not finding it. Where am I not looking?
Click on this, for Tom's web site.http://vbwhiz.isa-geek.net/plans/
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.
Bob
.
.
Bob
What are you looking for in a furniture forum? Plans? Construction methods? Design? Pictures of furniture for ideas?woodbender wrote:Okay I'm an idiot.
I'm looking for a "Furniture" forum around here somewhere and not finding it. Where am I not looking?
Octogenarian's have an earned right to be a curmudgeon.
Chuck in Lancaster, CA
Chuck in Lancaster, CA
-
wood_butcher
- Bronze Member
- Posts: 7
- Joined: Sat Jul 22, 2006 8:33 am
- Location: Victoria, Texas
-
wood_butcher
- Bronze Member
- Posts: 7
- Joined: Sat Jul 22, 2006 8:33 am
- Location: Victoria, Texas
-
woodbender
- Silver Member
- Posts: 12
- Joined: Tue Apr 07, 2009 5:51 pm
-
judaspre1982
- Platinum Member
- Posts: 1237
- Joined: Tue Jul 08, 2008 10:10 pm
===================
Last edited by judaspre1982 on Fri May 19, 2017 4:25 pm, edited 1 time in total.
Stand down, Wood Butcher.....[ATTACH]4138[/ATTACH]
Go to Toms original post in this thread, post #1.
Move your cursor to his link "Woodworking Plans" and click on it.
His personal web page will open up. On the left hand side is a menu.
Move your cursor to "Furniture" and click on it.
Move your cursor to "Gun Rack" and click on it.
Now move your cursor to either "Plans" or "3-D" and click on it.
That should get you where you want to go.............
Speaking of go......if you want to get anywhere in this forum, your next post should have a lot of humble pie and an apology to the forum members you smacked around. Those people didn't deserve that.
Go to Toms original post in this thread, post #1.
Move your cursor to his link "Woodworking Plans" and click on it.
His personal web page will open up. On the left hand side is a menu.
Move your cursor to "Furniture" and click on it.
Move your cursor to "Gun Rack" and click on it.
Now move your cursor to either "Plans" or "3-D" and click on it.
That should get you where you want to go.............
Speaking of go......if you want to get anywhere in this forum, your next post should have a lot of humble pie and an apology to the forum members you smacked around. Those people didn't deserve that.
- Attachments
-
- smiley_brow[1].gif (349 Bytes) Viewed 4947 times
-
JPG
- Platinum Member
- Posts: 35433
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Methinks you are being a bit harsh here! The link is not obvious at first! Not all 'newbies' are as adept at navigating the intricacies of this great forum.etc92guy wrote:Stand down, Wood Butcher.....[ATTACH]4138[/ATTACH]
Go to Toms original post in this thread, post #1.
Move your cursor to his link "Woodworking Plans" and click on it.
His personal web page will open up. On the left hand side is a menu.
Move your cursor to "Furniture" and click on it.
Move your cursor to "Gun Rack" and click on it.
Now move your cursor to either "Plans" or "3-D" and click on it.
That should get you where you want to go.............
Speaking of go......if you want to get anywhere in this forum, your next post should have a lot of humble pie and an apology to the forum members you smacked around. Those people didn't deserve that.
You did very clearly tell him how to get to where he was trying!:)
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange