What year was your Greenie born? Read the 1st post before voting
Moderator: admin
- mickyd
- Platinum Member
- Posts: 2999
- Joined: Mon Feb 09, 2009 1:18 pm
- Location: San Diego, CA
- Contact:
FYI - I looked back on the poll that dusty had postedasking what type of Mark V folks had. There were 21 Greenie's identified in that poll. Since there were only 13 total Greenie identified to date on this poll, I compared users names on the two polls and found that there are 16 Greenie owner in dusty's poll that didn't vote on this poll yet soooooo, I PM'd em all. If they all respond to the PM and cast their vote, we'll be up around 30 Greenie's identified.
Mike
Sunny San Diego
Sunny San Diego
- mickyd
- Platinum Member
- Posts: 2999
- Joined: Mon Feb 09, 2009 1:18 pm
- Location: San Diego, CA
- Contact:
etc92guy wrote:S# 342238 checking in. When I last looked at the SS serial # listing I figured it was a late '56 production run before X-mas. So as not to scew the results, it's checked in the poll as a '57 per MickeyD's .pdf.
Was your initial ~Dec1956 a guesstimate or were you going by some info we might not be aware of? Interested in knowing.
Mike
Sunny San Diego
Sunny San Diego
Guesstimate based on the 1957 starting serial # of 347643. I figure there had to be a last production run for the year and since the production volume was still pretty healthy at that time, it should fall into the last quarter. However, since there isn't any access to any plant records, it's pure conjecture.
Wonder if the records do still exist? Hmmmmmm........that might be a interesting treasure hunt.
Wonder if the records do still exist? Hmmmmmm........that might be a interesting treasure hunt.
- mickyd
- Platinum Member
- Posts: 2999
- Joined: Mon Feb 09, 2009 1:18 pm
- Location: San Diego, CA
- Contact:
etc92guy wrote:Guesstimate based on the 1957 starting serial # of 347643. I figure there had to be a last production run for the year and since the production volume was still pretty healthy at that time, it should fall into the last quarter. However, since there isn't any access to any plant records, it's pure conjecture.
Wonder if the records do still exist? Hmmmmmm........that might be a interesting treasure hunt.
If you notice on the ShopSmith serial number table here (scroll to bottom of page), they indicate SN 347642 as the serial number in July 1957 with no numbers shown Jan - Jun. In this table, they show the 1957 starting serial number as the same one, 347642. This is the odd thing that caught my eye where it is hard to image that there was NO PRODUCTION in the months where they don't report a serial number, thus the reason for the pdf I created.
Mike
Sunny San Diego
Sunny San Diego
- JPG
- Platinum Member
- Posts: 35598
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
As has previously been said(posted somewhere) the best guess is that the records were either lost between magna american going out of production and shopsmith inc. startup or were lost during the 'move of all records'.etc92guy wrote:. . . .
Wonder if the records do still exist? Hmmmmmm........that might be a interesting treasure hunt.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Never saw the m-to-m serial # listing before. I was going after the link on the parts and acc. page where the sales are listed. Hmmm.....Nuts...I thought the unit was as old as I was....Guess I'll give up on that one.
But, I wonder if there is still someone around who worked on the Magna plant floor and could tell us?
Sorry, JPG...just can't give up an rediscovering the past.
But, I wonder if there is still someone around who worked on the Magna plant floor and could tell us?
Sorry, JPG...just can't give up an rediscovering the past.
- mickyd
- Platinum Member
- Posts: 2999
- Joined: Mon Feb 09, 2009 1:18 pm
- Location: San Diego, CA
- Contact:
etc92guy wrote:Never saw the m-to-m serial # listing before. I was going after the link on the parts and acc. page where the sales are listed. Hmmm.....Nuts...I thought the unit was as old as I was....Guess I'll give up on that one.
But, I wonder if there is still someone around who worked on the Magna plant floor and could tell us?
Sorry, JPG...just can't give up an rediscovering the past.
I don't blame you a bit for wanting to get to the root of it. It's like working on your Greenie's genealogy.
I own a 1955 18' Chris Craft Rocket Runabout boat. I went to the Maritime Museum in Newport News, Virginia who holds all the Chris Craft records. Amazingly, the had the final production documentation folder for my boat, filed by it's serial number. The folder had the actual shop traveler along with in-process and final inspection test records. It showed the production sign offs by the guys who built and tested the boat along with all the lot numbers and serial numbers of materials that went into it. I was able to copy the entire folder and believe me, I cherish it. Why? Only people who appreciate that kind of stuff will ever understand the passion.
Mike
Sunny San Diego
Sunny San Diego
- robinson46176
- Platinum Member
- Posts: 4182
- Joined: Mon Mar 09, 2009 9:00 pm
- Location: Central Indiana (Shelbyville)
etc92guy wrote:.Nuts...I thought the unit was as old as I was....Guess I'll give up on that one.
I had to give up on that one before I started...
--
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill