Wow, is that stuff super hard. Probably the hardest wood I have ever cut or turned. While turning a small piece (to make a bottle stopper), I had a minor catch on the end grain. That catch caused the piece to crack where it was screwed into the mandrel and wobbled badly. I had to abandon the piece. I know that you must have a sharp chisel, in fact, I had just sharpen my roughing gouge. Has anyone else had a bad experience with ebony or share some advise for turning ebony?
Bob
San Diego
Turning black ebony
Moderator: admin
You could try CA glue in that crack.
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.
Bob
.
.
Bob
-
tom_k/mo
- Platinum Member
- Posts: 856
- Joined: Mon Jul 14, 2008 3:58 pm
- Location: St. Louis, MO
- Contact:
I've only turned ebony a couple times on pens, but yes it is HARD... The only thing I can suggest (which I'm sure you already know), take it slow, light cuts and SHARP chisels...
I was amazed after sanding and finishing an Ebony pen, it looks like shiny black plastic, you really have to tell people it's wood that hasn't been stained/dyed or painted.
I was amazed after sanding and finishing an Ebony pen, it looks like shiny black plastic, you really have to tell people it's wood that hasn't been stained/dyed or painted.
ShopSmith MarkV-520 with Belt Sander, Jointer, Band Saw, Strip Sander, Scroll Saw and Biscuit Jointer SPTs and a DC-3300...
Woodworking Hobbyist (Check out all my Woodworking Plans (http://vbwhiz.isa-geek.net/plans)
Aspiring Sandcarver: Breaking glass one grain at a time.
Black Powder Shooter (love the smell of burning sulfur).
Woodworking Hobbyist (Check out all my Woodworking Plans (http://vbwhiz.isa-geek.net/plans)
Aspiring Sandcarver: Breaking glass one grain at a time.
Black Powder Shooter (love the smell of burning sulfur).
Hi
Some years ago I watched a program on the Discovery Channel or one of those type of channels that was showing how the musical instrument the clarinet was made and how the people of Africa gathered specific straight grained pieces of ebony for the process. The clarinet bodies were turned on metal turning lathes using metal turning techniques and not hand held tools. They said that the ebony is almost as hard as some metals.
For what it's worth.
Bill V
Some years ago I watched a program on the Discovery Channel or one of those type of channels that was showing how the musical instrument the clarinet was made and how the people of Africa gathered specific straight grained pieces of ebony for the process. The clarinet bodies were turned on metal turning lathes using metal turning techniques and not hand held tools. They said that the ebony is almost as hard as some metals.
For what it's worth.
Bill V
I have turned an ebony pen blank before and it didn't seem quite as hard as this piece. Yes, the finish was really beautiful, it dazzled in the bright light. It does look like some sort of plastic. I'm wondering if a pen blank is pure wood or could it have some sort of filler in it to make it easier to turn?
Bob
I've thought about using CA glue but here's my question.
Would you still see the hairline crack or does it disappear?
Bob
San Diego
Bob
I've thought about using CA glue but here's my question.
Would you still see the hairline crack or does it disappear?
Bob
San Diego
Turning Ebony
I've had the best luck turning ebony using a scraper with a slight relief grind on the top edge, much the same as when cutting acrylics. Just my 2 cents.
"The road between friends is never long"
There was a turning article I read recently. For sanding/finishing, it summarized that ultra-fine sanding is often associated with a "plastic" sensation, and medium-fine sanding is considered "woody." The author had actually convinced some people that plastic was wood, and wood was plastic, just by choosing his final polishing degrees differently on his pens.rdewinter wrote:I have turned an ebony pen blank before and it didn't seem quite as hard as this piece. Yes, the finish was really beautiful, it dazzled in the bright light. It does look like some sort of plastic. I'm wondering if a pen blank is pure wood or could it have some sort of filler in it to make it easier to turn?
Bob
I've thought about using CA glue but here's my question.
Would you still see the hairline crack or does it disappear?
Bob
San Diego
I have used CA-glue and (matching-wood) sawdust for some minor repairs a few times lately. You can tell it's there by sight, but not by feel. And it really looks sharp as a rule.
Enjoy!
Chris