first bowl

enyoc · Post by **enyoc** » Fri Sep 25, 2009 7:59 pm

first bowl...

sycamore finished with shellawax then johnsons paste wax (both burnished in on the lathe)

found out that if i fill it with M&Ms the flaws become much less noticeable!

used the faceplate, then the oneway chuck in spreader (?) mode - I am so impressed with my SS and the chuck!

shydragon · Post by **shydragon** » Fri Sep 25, 2009 8:15 pm

Wow, I like it. Show me the bottom. We turned one at the TA a couple of years ago. I thought what fun, and bought the oneway stronghold chuck and a bunch of other stuff for turning, but have never done it, yet. Would really like to start doing it, but I remember very little about the setup.

enyoc · Post by **enyoc** » Fri Sep 25, 2009 8:21 pm

Thanks Pat!

can you tell by this pic how I undercut it?

there are lots of videos on youtube and elsewhere on the web of people using chucks for bowls, that's how I learned...

shydragon · Post by **shydragon** » Fri Sep 25, 2009 8:36 pm

From the TA Class over a year ago, I can sorta come up with a picture in by head. I seem to remember drilling a hole in the block that would eventually become the bowl opening. We then inserted a threaded whatever into the oneway, then spun the block on that into the hole that was just drilled. If I remember correctly, we are now turning the outside and bottom of the bowl. On the bottom, we cutout the area you show that the jaws expand against, or create one in the center that the jaws would close over. Then remove turned outside bowl and threaded insert and fasten to jaws and turn inside of bowl. (I think).

I think you have a great idea, search youtube for videos. I think turning some bowls, would be a lot of fun.

a1gutterman · Post by **a1gutterman** » Fri Sep 25, 2009 10:28 pm

Sweet looking bowl, JC!

mickyd · Post by **mickyd** » Fri Sep 25, 2009 10:41 pm

Real nice job JC!! Looks great. Finish looks awesome.

iclark · Post by **iclark** » Fri Sep 25, 2009 11:29 pm

wow! nice job. I had no idea that sycamore had such beautiful grain.

etc92guy · Post by **etc92guy** » Fri Sep 25, 2009 11:39 pm

That bowl is the result of a class A effort.

Did you eat all the M&M's before the picture was taken?

enyoc · Post by **enyoc** » Mon Sep 28, 2009 11:37 am

Thanks all for the great feedback and encouragement!

kalynzoo · Post by **kalynzoo** » Mon Sep 28, 2009 2:02 pm

Beautiful, I only hope I can do as well.