People are dying to buy them

This is a forum for intermediate to advanced woodworkers. Show off your projects or share your ideas.

Moderator: admin

User avatar
john
Platinum Member
Posts: 1048
Joined: Mon Mar 05, 2007 7:42 pm
Location: St. Lambert , Quebec

Post by john »

Now I am going to embarass my self all to h_ _ _! I should have been talking cubic inches all along.:o

That's what comes from living in a place that has converted to the metric system but some of us old guys are still living between the two.

After researching a bit I found that urns are generally between 200 - 240 cubic inches in volume.

Sorry about the confusion. For punishment, I promise to learn the conversion tables:D , well maybe.

Have fun

John
charlese
Platinum Member
Posts: 7501
Joined: Fri Dec 08, 2006 10:46 pm
Location: Lancaster, CA

Post by charlese »

Thanks for clearing that up, John!:) Units of measure often screw us up. You are certainly not alone!
Octogenarian's have an earned right to be a curmudgeon.
Chuck in Lancaster, CA
User avatar
robinson46176
Platinum Member
Posts: 4182
Joined: Mon Mar 09, 2009 9:00 pm
Location: Central Indiana (Shelbyville)

Post by robinson46176 »

I have only known a few people that were cremated. One of those was an old flame. ;)
--
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
User avatar
tfeeken
Gold Member
Posts: 28
Joined: Mon Aug 01, 2011 7:53 pm
Location: Franklin, NC

Post by tfeeken »

Where do you get 200 - 240 cuebic inches of ash? How do you design a urn to make sure it will hold all the ashes? A good Idea do sell turnings if you can meet the vol demands.
charlese
Platinum Member
Posts: 7501
Joined: Fri Dec 08, 2006 10:46 pm
Location: Lancaster, CA

Post by charlese »

tfeeken wrote:Where do you get 200 - 240 cubic inches of ash? How do you design a urn to make sure it will hold all the ashes? A good Idea do sell turnings if you can meet the vol demands.

Simple formula - 1 lb of live weight needs 1 cu. in. of urn.
http://www.mainelyurns.com/what-size-cremation-urn.html

My parents and MIL had urns that gave plenty of un-used space. In all three cases the ashes were in a fancy bag inside of the urn. What I've found is ashes aren't really fine stuff that'll blow away. Most of the ashes look like bone chips. There are some fines, however.

How's that for morbid?
Octogenarian's have an earned right to be a curmudgeon.
Chuck in Lancaster, CA
User avatar
fjimp
Platinum Member
Posts: 2345
Joined: Wed Jul 19, 2006 8:45 pm
Location: Lakewood, Colorado

Post by fjimp »

charlese wrote:Simple formula - 1 lb of live weight needs 1 cu. in. of urn.
http://www.mainelyurns.com/what-size-cremation-urn.html

My parents and MIL had urns that gave plenty of un-used space. In all three cases the ashes were in a fancy bag inside of the urn. What I've found is ashes aren't really fine stuff that'll blow away. Most of the ashes look like bone chips. There are some fines, however.

How's that for morbid?
Well stated and accurate.
F. Jim Parks
Lakewood, Colorado:)

When the love of power is replaced by the power of love the world will have a chance for survival.
charlese
Platinum Member
Posts: 7501
Joined: Fri Dec 08, 2006 10:46 pm
Location: Lancaster, CA

Post by charlese »

Looks like a columnar urn having an inside space of 8 inches inside diameter and 8 inches tall will yield plenty of room for anyone weighing less than 400 lbs. Most columnar urns I've seen are around that size, or larger.

(π x r²) x h = volume of a column


(Pi x radius squared) x hight of column = volume of column

(3.1416 x 4²") x 8" = 50.3 in² x 8" = 403 cu. inches (slide rule accuracy) (in case you check on calculator)
Octogenarian's have an earned right to be a curmudgeon.
Chuck in Lancaster, CA
User avatar
cincinnati
Platinum Member
Posts: 1172
Joined: Sun Apr 15, 2007 6:40 pm
Location: Cincinnati, Ohio

Post by cincinnati »

Here is a photo of the casket of the late Sam maloof.
(photo was too big to post here)

http://forums.pelicanparts.com/uploads1 ... 648190.jpg
User avatar
cincinnati
Platinum Member
Posts: 1172
Joined: Sun Apr 15, 2007 6:40 pm
Location: Cincinnati, Ohio

Post by cincinnati »

[quote="ryanbp01
While we're on the subject, do you know the difference between a coffin and a casket? I do!:)
BPR[/QUOTE"]

I thought you guys were smarter than that. Everyone knows that a Coffin is something you have with a bad cold. :rolleyes:
User avatar
cincinnati
Platinum Member
Posts: 1172
Joined: Sun Apr 15, 2007 6:40 pm
Location: Cincinnati, Ohio

Post by cincinnati »

Post Reply