No reason to think that it's not the Rustoleum dark bronze hammered finish. Here's the Rustoleum site to see. (top row, farthest right sample)JPG40504 wrote:He said it was copper and bronze, but looks like copper and dark gray to me. If it were bronze, it would be very close to a 'Goldie'! Either way it looks good - like the brace/shelf idea!
Time to restore the 510
Moderator: admin
-
mickyd
- Platinum Member
- Posts: 2999
- Joined: Mon Feb 09, 2009 1:18 pm
- Location: San Diego, CA
- Contact:
Mike
Sunny San Diego
Sunny San Diego
-
mickyd
- Platinum Member
- Posts: 2999
- Joined: Mon Feb 09, 2009 1:18 pm
- Location: San Diego, CA
- Contact:
farmer....please don't tell me that this picture has the Lincoln you use to haul the ShopSmith around in!!:eek:robinson46176 wrote:I posted a picture of a little Massey Harris Pony the other day that I just bought to restore. This picture is not of mine but is the factory colors for one and shows the red and yellow together. Once my Frankensmith is painted those colors I don't think I will lose it.
[ATTACH]6622[/ATTACH]
Mike
Sunny San Diego
Sunny San Diego
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
mickyd wrote:farmer....please don't tell me that this picture has the Lincoln you use to haul the ShopSmith around in!!:eek:
He won't because there are no lincolns in the pix!:rolleyes:
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
mickyd wrote:Atsa T-bird??
Uh Huh! Late 1970's vintage.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
-
cat_couple
- Gold Member
- Posts: 35
- Joined: Sun Sep 30, 2007 1:08 pm
- Location: New Philadelphia, Ohio
I am going to load the pics here shortly. The information has been awesome!!! I am so looking forward to sharing this project with you all. also, keep your eyes peeled, I am looking for a copy of the toy plans, especially the bulldozer from WORKBENCH MAGAZINE DECEMBER 1979. anby help would be awesome!!!
Regards
Eric
Regards
Eric
Eric J. Hovan
1988 Model 510 S/N 555188, 10 ER S/N# 41855, bandsaw, jointer, belt sander, scroll saw.
New Philadelphia, Ohio
1988 Model 510 S/N 555188, 10 ER S/N# 41855, bandsaw, jointer, belt sander, scroll saw.
New Philadelphia, Ohio
-
cat_couple
- Gold Member
- Posts: 35
- Joined: Sun Sep 30, 2007 1:08 pm
- Location: New Philadelphia, Ohio
Pics of the beginning point
Well here are the pics of what I am starting with. The Table extensions are not shown, but i have them and the new lower saw guard.
- Attachments
-
- 100_0893.jpg (185.99 KiB) Viewed 5796 times
-
- 100_0894.jpg (194.11 KiB) Viewed 5779 times
-
- 100_0896.jpg (200.4 KiB) Viewed 5770 times
-
- 100_0897.jpg (144.88 KiB) Viewed 5764 times
-
- 100_0898.jpg (139.28 KiB) Viewed 5772 times
Eric J. Hovan
1988 Model 510 S/N 555188, 10 ER S/N# 41855, bandsaw, jointer, belt sander, scroll saw.
New Philadelphia, Ohio
1988 Model 510 S/N 555188, 10 ER S/N# 41855, bandsaw, jointer, belt sander, scroll saw.
New Philadelphia, Ohio
Hey it looks GOOD, just a good cleaning and PM should doit.
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.
Bob
.
.
Bob
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
I agree she looks good! It otter clean up real good. The lower tubes(bench) appear in the pix to be painted gray????? Or do they just need a good cleaning.waxing?cat_couple wrote:Well here are the pics of what I am starting with. The Table extensions are not shown, but i have them and the new lower saw guard.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
-
dusty
- Platinum Member
- Posts: 21530
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
Time to Restore the 510
Yup, it looks like a real nice machine. A little tender loving care and she'll be like brand new.
You better take care though, or you'll lose that John Deere cup. It's sitting right on the edge.
You better take care though, or you'll lose that John Deere cup. It's sitting right on the edge.
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.