Potpourri starting Dec 14, 2009
Moderator: admin
-
cocacola1012
- Gold Member
- Posts: 106
- Joined: Tue Nov 24, 2009 8:19 am
- Location: Virginia Beach, VA
-
cocacola1012
- Gold Member
- Posts: 106
- Joined: Tue Nov 24, 2009 8:19 am
- Location: Virginia Beach, VA
mickyd wrote:You want to under expose your photograph by 2 f-stops. Your film speed is ISO 400, your lens is a 28mm wide angle. Your shutter speed is 1/500th of a second. Your wearing size 10 red sneakers and a medium baseball cap.
Your cameras exposure meter isn't working and you don't have a light meter either. What will you set the cameras aperture at to under expose your photo by 2 f-stops?![]()
(I'm at lunch with too much time on my hands, bored stiff!!)
P.S. I tried to make the question non-googleable!! I will now go out and see if I can google the answer
Where is the bill of the cap?
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.
Bob
.
.
Bob
I just wanted to check the facts here.
Flagstaff AZ
Aug. 21, 2010
12:00 pm
[ATTACH]6967[/ATTACH]
Red sneakers
[ATTACH]6968[/ATTACH]
No clouds
[ATTACH]6969[/ATTACH]
Suns position is in the E SE
[ATTACH]6970[/ATTACH]
You found grass
[ATTACH]6971[/ATTACH]
More questions may follow.
Flagstaff AZ
Aug. 21, 2010
12:00 pm
[ATTACH]6967[/ATTACH]
Red sneakers
[ATTACH]6968[/ATTACH]
No clouds
[ATTACH]6969[/ATTACH]
Suns position is in the E SE
[ATTACH]6970[/ATTACH]
You found grass
[ATTACH]6971[/ATTACH]
More questions may follow.
- Attachments
-
- ScreenHunter_006.jpg (22.41 KiB) Viewed 5799 times
-
- ScreenHunter_007.jpg (39.07 KiB) Viewed 5798 times
-
- ScreenHunter_008.jpg (5.37 KiB) Viewed 5798 times
-
- ScreenHunter_009.jpg (5.49 KiB) Viewed 5798 times
-
- ScreenHunter_010.jpg (120.96 KiB) Viewed 5803 times
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
After thinking about it I decided I'd go with a F16, at the 1/500 sec and 400 iso film. This yields a EV of 15 which seem about right for the sunny day. Now to make someone very happy I'll shoot it at F22.
Then I take the broken camera and reset the ISO to 100, change the f-stop to 11 and the speed to 1/250 sec. and make sure I had my uv filter on. At this point the hot sun would cause me to die on the spot. At some point in the future they would find the camera and look at the pictures and wonder who would go this far to get a picture of grass in AZ.
Ed
Then I take the broken camera and reset the ISO to 100, change the f-stop to 11 and the speed to 1/250 sec. and make sure I had my uv filter on. At this point the hot sun would cause me to die on the spot. At some point in the future they would find the camera and look at the pictures and wonder who would go this far to get a picture of grass in AZ.
Ed
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
A true story! Once upon a time: - - - Sometime in the 1960s, in Montana, a beautiful elderly woman who was very active in social and community affairs read a government document that really upset her. Although she didn't know it, she was classified as "one of the poor". The government had figured out that anyone having an annual income of less than $2,000 was "Poor". She had never thought of herself as poor, and to be arbitrarily put into this category upset her tremendously!
I thought I knew how she felt, but today got a stinger that made me think more of her situation. There was a TV news clip today that reported builders are refurbishing houses for poor folks in Riverside County, CA.
Those poor folks were class as those making less than $77,000 per year. Wow! Think the LOML and I just made the "pauper list".
Oh! on secod thought, we are O.K. for a while, as we don't live in Riverside County.
I thought I knew how she felt, but today got a stinger that made me think more of her situation. There was a TV news clip today that reported builders are refurbishing houses for poor folks in Riverside County, CA.
Those poor folks were class as those making less than $77,000 per year. Wow! Think the LOML and I just made the "pauper list".
Oh! on secod thought, we are O.K. for a while, as we don't live in Riverside County.
Octogenarian's have an earned right to be a curmudgeon.
Chuck in Lancaster, CA
Chuck in Lancaster, CA
Check this out:
http://www.shopsmith.com/ownersite/cata ... ediscs.htm
Ed
http://www.shopsmith.com/ownersite/cata ... ediscs.htm
Ed
navycop wrote:On Nick's chisel shaping video he is using a disk. I know there are certain grits you have to use, but are there certain disk you need? I.E. aluminum oxcide or is it just a regular sanding disk?
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]