I just received my lathe duplicator and watched the video. He made a candlestick and said that the patterns were in the owner's manual. I can't seem to find it. I looked in the Mark V manual and PTWFE, but no luck. Does anyone have the patterns, or know where to find them?
As this is my first post, I guess this is a good time for a brief introduction. I've been a Mark V owner since 1985, but for the past 15 years or so it was used primarily for home repair/renovation. I recently got back into the joy of woodworking and upgraded my 500 to a 520. WOW! What a difference!
Michael
Lathe Duplicator Candlestick Plans
Moderator: admin
-
michaeltoc
- Gold Member
- Posts: 222
- Joined: Wed Feb 25, 2009 9:51 pm
- Location: White Plains, NY
Lathe Duplicator Candlestick Plans
Michael
Mark V Model 500 (1985) upgraded to 520 (2009) and PowerPro (2011); Bandsaw, Jointer, Jigsaw, Planer.
Mark V Model 500 (1985) upgraded to 520 (2009) and PowerPro (2011); Bandsaw, Jointer, Jigsaw, Planer.
-
kd6vpe
- Platinum Member
- Posts: 585
- Joined: Mon Jun 11, 2007 8:53 pm
- Location: Owasso, Oklahoma
- Contact:
I just got mine and saw the same thing on the dvd. Remember this was a remake from 1985 it may be the these plans were only from that time period when the tape was made and when the manual was printed. A good question to the group and maybe a call to ShopSmith would help. Thanks for asking I will be curious to see the outcome of this thread.
SS 500 upgraded to 510; SS bandsaw; SS jointer
SS Oscillating Drum Sander; Universal Lathe Rest;
lathe duplicatior, shaper fence and shapers; SS Belt
Sander
Jim
www.youtube.com/kd6vpe
SS Oscillating Drum Sander; Universal Lathe Rest;
lathe duplicatior, shaper fence and shapers; SS Belt
Sander
Jim
www.youtube.com/kd6vpe
Could they be in the "self study guide" that is part of the Mark V owner's manual? I'll try to remember to look through mine this weekend.
Heath
Central Louisiana
-10ER - SN 13927, Born 1949, Acquired October 2008, Restored November, 2008
-10ER - SN 35630, Born 1950, Acquired April 2009, Restored May 2009, A34 Jigsaw
-Mark V - SN 212052, Born 1986, Acquired Sept 2009, Restored March 2010, Bandsaw
-10ER - SN 39722, Born 1950, Acquired March 2011, awaiting restoration
Central Louisiana
-10ER - SN 13927, Born 1949, Acquired October 2008, Restored November, 2008
-10ER - SN 35630, Born 1950, Acquired April 2009, Restored May 2009, A34 Jigsaw
-Mark V - SN 212052, Born 1986, Acquired Sept 2009, Restored March 2010, Bandsaw
-10ER - SN 39722, Born 1950, Acquired March 2011, awaiting restoration
-
michaeltoc
- Gold Member
- Posts: 222
- Joined: Wed Feb 25, 2009 9:51 pm
- Location: White Plains, NY
Good idea. I sent an email, and got a response within a few hours. Those Shopsmith CS folks are great!!!kd6vpe wrote: maybe a call to ShopSmith would help.
I've attached the file (hope I did it right), as I'm sure there are a few others who took advantage of the email special on the duplicator, and may be looking for the plans.
Michael
- Attachments
-
Candleholder.pdf- (482.75 KiB) Downloaded 628 times
Michael
Mark V Model 500 (1985) upgraded to 520 (2009) and PowerPro (2011); Bandsaw, Jointer, Jigsaw, Planer.
Mark V Model 500 (1985) upgraded to 520 (2009) and PowerPro (2011); Bandsaw, Jointer, Jigsaw, Planer.
-
JPG
- Platinum Member
- Posts: 35457
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
michaeltoc wrote:Good idea. I sent an email, and got a response within a few hours. Those Shopsmith CS folks are great!!!
I've attached the file (hope I did it right), as I'm sure there are a few others who took advantage of the email special on the duplicator, and may be looking for the plans.
Michael
You done real GOOD!]http://www.ridgidforum.com/forum/images ... -to-go.gif[/IMG]
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
-
kd6vpe
- Platinum Member
- Posts: 585
- Joined: Mon Jun 11, 2007 8:53 pm
- Location: Owasso, Oklahoma
- Contact:
Michael,
Did this come from shopsmith?? What did they say. And by the way thank you I think I will do like you and this will be my first lathe duplicator project. Not sure when I can get it the shop is still thawing out yet and the mud is horrible.
Thank you for posting the plans.
Did this come from shopsmith?? What did they say. And by the way thank you I think I will do like you and this will be my first lathe duplicator project. Not sure when I can get it the shop is still thawing out yet and the mud is horrible.
Thank you for posting the plans.
SS 500 upgraded to 510; SS bandsaw; SS jointer
SS Oscillating Drum Sander; Universal Lathe Rest;
lathe duplicatior, shaper fence and shapers; SS Belt
Sander
Jim
www.youtube.com/kd6vpe
SS Oscillating Drum Sander; Universal Lathe Rest;
lathe duplicatior, shaper fence and shapers; SS Belt
Sander
Jim
www.youtube.com/kd6vpe
-
michaeltoc
- Gold Member
- Posts: 222
- Joined: Wed Feb 25, 2009 9:51 pm
- Location: White Plains, NY
Yes, it came from Shopsmith. They didn't say anything, just "Thanks for the inquiry..." and sent a second email containing the scanned image. The page most likely was scanned from the original manual, as you can see the 3-hole punch and page 24 on it.
Michael
Mark V Model 500 (1985) upgraded to 520 (2009) and PowerPro (2011); Bandsaw, Jointer, Jigsaw, Planer.
Mark V Model 500 (1985) upgraded to 520 (2009) and PowerPro (2011); Bandsaw, Jointer, Jigsaw, Planer.
-
easterngray
- Platinum Member
- Posts: 720
- Joined: Sun Mar 11, 2007 8:28 pm
- Location: Cape Cod MA.