For those who caught my other thread, I recently traded this pile of wood
[ATTACH]10599[/ATTACH]
into a Mark V 510
[ATTACH]10600[/ATTACH]
I decided the right thing to do was rehome that 510. The guy who ended up bying it was replacing a Mark VII that he got from his dad. As with many Mark VII headstocks, the speed control cam had melted. He was going to take his Mark VII to the dump, but I asked him to bring it by instead. Here she is in all her glory.
[ATTACH]10601[/ATTACH]
Here is a shot of the melted cam
[ATTACH]10602[/ATTACH]
Mark VII - saved
Moderator: admin
Mark VII - saved
- Attachments
-
- Woodpile.jpg (122.6 KiB) Viewed 1929 times
-
- ShopSmith_Mark_V_510_-_1987_-_011942.jpg (69.35 KiB) Viewed 1930 times
-
- Mark VII.jpg (83.96 KiB) Viewed 1926 times
-
- Mark VII - Melted CAM.jpg (94.17 KiB) Viewed 1938 times
Mark 7, Pro Planer, Jointer, Bandsaw w/Kreg, Biscuit Joiner, Belt Sander, Jig Saw, Ringmaster, DC3300, Overarm Pin Router, Incra Ultimate setup
JWBS-14 w/6" riser, RBI Hawk 226 Ultra, Bosch GSM12SD Axial Glide Dual Compound Miter Saw
-- I have parts/SPTs available, so if you are in the Seattle area and need something let me know --
damagi AT gmail DOT com
JWBS-14 w/6" riser, RBI Hawk 226 Ultra, Bosch GSM12SD Axial Glide Dual Compound Miter Saw
-- I have parts/SPTs available, so if you are in the Seattle area and need something let me know --
damagi AT gmail DOT com
Is the Mark VII complete and just needs the cam and bearing?
I think that I can fix the bad bearing and make a new cam.
get back to me @ gdsenn@comcast.net
Garry
I think that I can fix the bad bearing and make a new cam.
get back to me @ gdsenn@comcast.net
Garry
-
ronlyon5trr
- Bronze Member
- Posts: 2
- Joined: Mon Aug 30, 2010 6:12 pm
Mark VII saved
I could sure use the new cam if you can make one for me. I miss my Shopsmith Mark VII and want to get it back in action. If anyone is making these let me know.