Dust collector sound
Moderator: admin
Dust collector sound
I have the dust collector. It works great BUT the sound is extremely bothersome. I have taken it apart/cleaned and continue to have the same issue. Is this the nature of the beast or is it my machine?
- dusty
- Platinum Member
- Posts: 21530
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
Without being able to hear it this is hard to say but the dust collector is very noisy. I work in a garage shop. When I have a lot to do, I roll the dust collector outside and let the neighbors listen to it rather than me. The hose gets in the way sometimes but it is quieter in the shop.robdob wrote:I have the dust collector. It works great BUT the sound is extremely bothersome. I have taken it apart/cleaned and continue to have the same issue. Is this the nature of the beast or is it my machine?
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.
- papahammer8
- Gold Member
- Posts: 161
- Joined: Fri Apr 06, 2007 9:03 pm
- Location: lafayette alabama
- JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Like Dusty has already said, without actually hearing it, we cannot tell if 'yours' is noisier than 'typical'. Keep in mind, Vacuum cleaners ARE noisey! The SS DC is IMHO quieter than most. The vanes are like a helicopter rotor(being smaller their sound pitch is higher - whine not tumpa thumpa!)
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
- mickyd
- Platinum Member
- Posts: 2999
- Joined: Mon Feb 09, 2009 1:18 pm
- Location: San Diego, CA
- Contact:
Heck, my DC3300 is quiter than my Shopvac!!JPG40504 wrote:Like Dusty has already said, without actually hearing it, we cannot tell if 'yours' is noisier than 'typical'. Keep in mind, Vacuum cleaners ARE noisey! The SS DC is IMHO quieter than most. The vanes are like a helicopter rotor(being smaller their sound pitch is higher - whine not tumpa thumpa!)
Mike
Sunny San Diego
Sunny San Diego
- Ed in Tampa
- Platinum Member
- Posts: 5834
- Joined: Fri Jul 21, 2006 12:45 am
- Location: North Tampa Bay area Florida
My DC3000 is very quiet, I often forget it is running and leave it running during setups and such.
Admittedly with it running and my SS I can't hear the radio but when I turn the SS off the noise level comes down to something I seem to tolerate thus I forget to turn the DC off.
Now if I pick up a rag or something that will catch on the impeller the noise level instantly changes and I have to shut the thing down and hope the offending trash falls off the impeller. Which it never does and I'm faced with a tear down and cleaning.
Last time, two days ago it was a Home Depot cash register receipt that got sucked in and would not fall off the impeller. Pulled the dust bag and shroud and reached in and retrieved the slip. Put it all back together, turned it on and sucked up the slip again from where I threw it on the floor.
Oh goody I get to take it apart again! This time I threw the slip in the trash instead of the floor.
Admittedly with it running and my SS I can't hear the radio but when I turn the SS off the noise level comes down to something I seem to tolerate thus I forget to turn the DC off.
Now if I pick up a rag or something that will catch on the impeller the noise level instantly changes and I have to shut the thing down and hope the offending trash falls off the impeller. Which it never does and I'm faced with a tear down and cleaning.
Last time, two days ago it was a Home Depot cash register receipt that got sucked in and would not fall off the impeller. Pulled the dust bag and shroud and reached in and retrieved the slip. Put it all back together, turned it on and sucked up the slip again from where I threw it on the floor.
Oh goody I get to take it apart again! This time I threw the slip in the trash instead of the floor.
Ed in Tampa
Stay out of trouble!
Stay out of trouble!