Anyone want a project Mark V?

Forum for Maintenance and Repair topics. Feel free to ask questions or contribute.

Moderator: admin

Post Reply
spiderclimber
Gold Member
Posts: 218
Joined: Wed Mar 23, 2011 9:19 am
Location: Olmsted Falls Ohio

Anyone want a project Mark V?

Post by spiderclimber »

This was in my local Craiglist around Cleveland.

Mark V $75

Apparently not used in the last 25 years. My wife would kill me if I came home with another one.
Top
User avatar
robinson46176
Platinum Member
Posts: 4182
Joined: Mon Mar 09, 2009 9:00 pm
Location: Central Indiana (Shelbyville)

Post by robinson46176 »

spiderclimber wrote:This was in my local Craiglist around Cleveland.

Mark V $75

Apparently not used in the last 25 years. My wife would kill me if I came home with another one.


A little far for me (I have gone a lot farther :rolleyes: ) and I don't have a need. Also I may be treading water a little right now for considering a TWH that a neighbor's parents are looking to shift... :)

.
--
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
Top
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Post by JPG »

HURRY!!!! Get it before the man from Walla Walla WA comes and gets it!:D

A bit far for me also! Now if it was Covington..... I would have to beat Cincinnati to it!:)
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Top
User avatar
robinson46176
Platinum Member
Posts: 4182
Joined: Mon Mar 09, 2009 9:00 pm
Location: Central Indiana (Shelbyville)

Post by robinson46176 »

JPG40504 wrote:HURRY!!!! Get it before the man from Walla Walla WA comes and gets it!:D

A bit far for me also! Now if it was Covington..... I would have to beat Cincinnati to it!:)


My daughter who lives just north east of Chattanooga TN was going to move up near Lexington but has decided to move to someplace warmer instead. If she moves west I will not be passing through the Lexington area very often...
I do still get to the Boone County KY and Harrison County KY now and then as well as the Hopkins County KY area at the more westerly part of the state . Usually stomping around old graveyards trolling for ancestors. I need to plan a short trip of that nature to Nicholas County KY this summer.
When I plan such a trip I like to check the local Craigslist to see if anyone nearby is trying to get rid of something I can't live without. ;)


.
--
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
Top
User avatar
joedw00
Platinum Member
Posts: 1957
Joined: Thu Jul 20, 2006 7:01 pm
Location: Wichita, Kansas

Post by joedw00 »

Too late This posting has been deleted by its author.:(
Joe

520, Bandsaw, Beltsander, Delta Drill Press, Delta Lathe, Craftsman Planner/Jointer, Delta Planner, Mini "Greenie" Shorty 500

Being a VETERAN is an honor
Being a GRANDPA is priceless
Top
spiderclimber
Gold Member
Posts: 218
Joined: Wed Mar 23, 2011 9:19 am
Location: Olmsted Falls Ohio

Post by spiderclimber »

All it said was "I have a Mark V that hasn't been used in 25 years. (35 plus years old). There are a couple of boxes of stuff that goes with it. It has been stored inside. I don't know anything else about it than that."

Wasn't really detailed but I figured not turned on in 25 years means a lot of work :)
Top
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Post by JPG »

spiderclimber wrote:All it said was "I have a Mark V that hasn't been used in 25 years. (35 plus years old). There are a couple of boxes of stuff that goes with it. It has been stored inside. I don't know anything else about it than that."

Wasn't really detailed but I figured not turned on in 25 years means a lot of work :)
No more than if that was 5 years(or less). What is more relevant is the first 10!:)
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Top
User avatar
cincinnati
Platinum Member
Posts: 1172
Joined: Sun Apr 15, 2007 6:40 pm
Location: Cincinnati, Ohio

Post by cincinnati »

JPG40504 wrote:HURRY!!!! Get it before the man from Walla Walla WA comes and gets it!:D

A bit far for me also! Now if it was Covington..... I would have to beat Cincinnati to it!:)
Going to be up that way in about a month
Top
Post Reply

Return to “Maintenance and Repair”