Scotch brite

Forum for Maintenance and Repair topics. Feel free to ask questions or contribute.

Moderator: admin

Post Reply
User avatar
jcraigie
Platinum Member
Posts: 505
Joined: Sun Sep 05, 2010 8:17 pm
Location: Fowlerville, Michigan

Post by jcraigie »

I did the same with a drill. I'll post a pix of my setup later. My problem is that after I waxed the tubes my SS sat for about 2 weeks and the tubes are starting to rust again already. Of don't know if I didn't wax them right or what?
1984 Mark V 500 and an early 1954 greenie. jointer, belt sander, bandsaw, jigsaw, planner.

Jeff
Top
User avatar
etc92guy
Gold Member
Posts: 263
Joined: Mon Aug 25, 2008 10:15 pm
Location: Hartland, WI

Post by etc92guy »

Bill Mayo used a bracket on the end of a Shopsmith with wheels from a skateboard for the tube to rest on.
Craig
Hartland, WI
-Mark 5 "Greenie" S/N 342238, Manuf. mmm/mmm 1957, Acq. Oct. 2008, Joiner S/N M067266
-10 E/ER(?) S/N Unknown, Joiner 4E S/N 40051
Top
Post Reply

Return to “Maintenance and Repair”