Help requested

jc24fan · Post by **jc24fan** » Sun Sep 25, 2011 7:51 am

I picked up a model ER 26768 ant an auction yesterday. I am looking for a munual to see what parts I am missing and how it all works. Any help would be appreciated.

Thanks!

perryobear · Post by **perryobear** » Sun Sep 25, 2011 9:34 am

Hi,

Try looking at the following site:

http://www.songofthegreatlakes.com/ss10er.htm

JPG · Post by **JPG** » Sun Sep 25, 2011 11:59 am

jc24fan wrote:I picked up a model ER 26768 ant an auction yesterday. I am looking for a munual to see what parts I am missing and how it all works. Any help would be appreciated.

Thanks!

If you had enabled emails in your profile, you would already have a pdf copy of a 10er manual in your mail box!

;)

billmayo · Post by **billmayo** » Sun Sep 25, 2011 2:53 pm

Skip Campbell, modurator/owner of the Yahoo Group Shopsmith10ERusers is the GURU for the 10E/10ER. There are 10E/10ER files, photos and many messages available on this Forum.

I still have a few 10ER parts available if you have a need or want. Thanks.

Bill Mayo http://www.billstoolz.com

jc24fan · Post by **jc24fan** » Tue Sep 27, 2011 4:49 pm

If you had enabled emails in your profile, you would already have a pdf copy of a 10er manual in your mail box!

I am new to this forum thing. Explain to me how.:

dusty · Post by **dusty** » Tue Sep 27, 2011 5:29 pm

jc24fan wrote:If you had enabled emails in your profile, you would already have a pdf copy of a 10er manual in your mail box!

I am new to this forum thing. Explain to me how.:

Welcome to the forum jc.

I hope these screen shots will help:

[ATTACH]14411[/ATTACH]

[ATTACH]14412[/ATTACH]

First click on User CP (top right hand corner of the forum screen)

then

click on Edit Options in the Control Panel which will put you in an area where you decide what you what displayed to the forum.

You might now want to browse around the Control Panel to see what else it offers. This area is pretty self explanatory - most of the time.

JPG · Post by **JPG** » Tue Sep 27, 2011 8:06 pm

jc24fan wrote:If you had enabled emails in your profile, you would already have a pdf copy of a 10er manual in your mail box!

I am new to this forum thing. Explain to me how.:

Sorry, that was abrupt, but intended to provoke thinking. I keep assuming new folks have set those things at the beginning.

In many cases the easiest way to respond with voluminous information is by way of e-mailing it since attachments are fairly limited in this forum.

If you have enabled e-mails, one can be sent to you. Your e-mail address is not revealed during this. My Bad Tain't so. In order to send an e-mail with a large attachment, the sender needs the e-mail address and must send that e-mail external to the forum.

However if e-mails are enabled, the 'sender' can contact the recipient with a request for their address thru the forum.

jc24fan · Post by **jc24fan** » Wed Sep 28, 2011 4:50 pm

Thanks for the information Dusty. I think i have most of it figured out, Still learning.
JPG40504 - Try sending me the copy again if you don't mind.

Thanks!

JPG · Post by **JPG** » Wed Sep 28, 2011 5:31 pm

JPG40504 wrote: . . .

However if e-mails are enabled, the 'sender' can contact the recipient with a request for their address thru the forum.

Either here or by way of a PM, send me your e-mail address and it shall appear.

dusty · Post by **dusty** » Wed Sep 28, 2011 5:33 pm

jc24fan wrote:Thanks for the information Dusty. I think i have most of it figured out, Still learning.
JPG40504 - Try sending me the copy again if you don't mind.

Thanks!

Try clicking on "Edit Profile". You may find a few questions there that you want to answer too.

Shopsmith Forums

Help requested

Help requested

Yahoo Shopsmith10ERusers Forum