Forum for people who are new to woodworking. Feel free to ask questions or contribute.
Moderator: admin
charlese
Platinum Member
Posts: 7501 Joined: Fri Dec 08, 2006 10:46 pmLocation: Lancaster, CA
Post
by charlese Fri Apr 15, 2011 9:48 pm
swampgator wrote: Charles, this sounds like a great idea. But, I'm a bit slow on this concept. Do you have a pic on the setup? I just don't get the router chuck. That's my hold up. Thanks for your help.
Found the photo in post #16 of this thread, but no router bit or chuck attached. The first photo shows the position of the table and fence when making mortises.
https://forum.shopsmith.com/viewtopic.php?t=1124&highlight=rip+fence
Here are the Shopsmith router chucks - there is one for 1/4" shanked bits and one for 1/2" shanks. The 1/2" chuck is shown with the shield and the 1/4" is on the right side.
http://www.shopsmith.com/ownersite/catalog/rm_routerchuckshield.htm Octogenarian's have an earned right to be a curmudgeon.
swampgator
Platinum Member
Posts: 1256 Joined: Fri Nov 27, 2009 9:32 pmLocation: Pensacola, FL
Post
by swampgator Sat Apr 16, 2011 8:08 pm
Thanks, Charles. I have a 500 machine and all these attachments. Will do some experimentation. Will return if I have more questions. Thanks again.
Steve, the old Florida gator
I just love it when she says I can go make sawdust.
