DC for the OAR

JPG · Post by **JPG** » Wed Jun 22, 2011 7:59 pm

Gene Howe wrote:Tried calling this AM. They give their hours and then say that they are closed at this time.???????

If AM means about the time Dusty gets up, they were not open yet!:D

nuhobby · Post by **nuhobby** » Thu Jun 23, 2011 5:39 pm

SDSSmith wrote:I suspect that the assembly number (515146) may have changed with the new OPR. The individual parts of the assembly (dust chute, brushes, etc.) show up online.

Like professional sports teams, you can't tell the players without a program. Shopsmith parts numbers change and you can't tell what's what without a manual.]

Here's some p/n's from my late-model OPR listing:
522282 = rear guard / dust chute assembly, consisting of
514913 rear guard / dust chute
514914 strip brush (2)
514915 deflector
513216 wing nut 1/4-20 (2)
120393 flat washer 5/16 (4)
514881 self-tapping screw (2)

SDSSmith · Post by **SDSSmith** » Thu Jun 23, 2011 6:31 pm

nuhobby wrote:Here's some p/n's from my late-model OPR listing:
522282 = rear guard / dust chute assembly, consisting of
514913 rear guard / dust chute
514914 strip brush (2)
514915 deflector
513216 wing nut 1/4-20 (2)
120393 flat washer 5/16 (4)
514881 self-tapping screw (2)

That's the magic number, 522282, for the assembly. All the other part numbers are the same as the free standing OPR parts list in my earlier post. Thanks Chris.

SDSSmith · Post by **SDSSmith** » Thu Jun 23, 2011 6:35 pm

nuhobby wrote:Here's some p/n's from my late-model OPR listing:
522282 = rear guard / dust chute assembly, consisting of
514913 rear guard / dust chute
514914 strip brush (2)
514915 deflector
513216 wing nut 1/4-20 (2)
120393 flat washer 5/16 (4)
514881 self-tapping screw (2)

Chris, Is your late model OPR freestanding or Mark V mounted? The assembly number above does not show up online. The other part numbers are the same as in the PDF in the earlier post.

nuhobby · Post by **nuhobby** » Thu Jun 23, 2011 6:54 pm

SDSSmith wrote:Chris, Is your late model OPR freestanding or Mark V mounted? The assembly number above does not show up online. The other part numbers are the same as in the PDF in the earlier post.

Rob, mine is the Mark V mount OPR. Interesting that the 'assembly' part number looks almost like a useless placeholder (?).

SDSSmith · Post by **SDSSmith** » Thu Jun 23, 2011 7:03 pm

nuhobby wrote:Rob, mine is the Mark V mount OPR. Interesting that the 'assembly' part number looks almost like a useless placeholder (?).

Now I am confused. Maybe SS is teasing and they really don't sell the "assembly".]

JPG · Post by **JPG** » Thu Jun 23, 2011 9:08 pm

SDSSmith wrote:Now I am confused. Maybe SS is teasing and they really don't sell the "assembly".]

Wouldn't be the first 'fluke' in the online stuff that "WE" discovered regarding older models!;)

Ron309753 · Post by **Ron309753** » Fri Jul 15, 2011 8:32 am

Gene,

I got a e-mail notification of this sale from PeachTree:

http://www.ptreeusa.com/edirect_071211.htm

Check out the video. I think this would work very well for pin routing. I'm going to order it.

Sincerely,

Ron309753

Gene Howe · Post by **Gene Howe** » Fri Jul 15, 2011 10:53 am

Thanks, Ron.
Just ordered it. I think it's the ticket.

reible · Post by **reible** » Fri Jul 15, 2011 1:10 pm

Here is another post about dust/chip collection...

https://forum.shopsmith.com/viewtopic.php?t=2454

So far my in my testing I have not found a way to contain those chips very well, I've now given up on doing so and live with it the way it is.

Ed