Page 3 of 4
Posted: Tue Apr 07, 2009 7:31 pm
by dusty
[quote="JPG40504"]YEP! Assuming all OUR input is correct. WE have been doing some concluding without verification from Diane!]
How can this info be wrong? We have been given the serial number! What else do we need:rolleyes: except a thorough understanding of the Shopsmith serial number charts for the transition period (1960-1963).
Posted: Tue Apr 07, 2009 7:38 pm
by JPG
dusty wrote:How can this info be wrong? We have been given the serial number! What else do we need:rolleyes: except a thorough understanding of the Shopsmith serial number charts for the transition period (1960-1963).
You have more faith in those charts than I have. Do not forget she originally thought 1972. I DO feel confident about OUR conclusions. Was pretty confident about the dial setup gauge also!:eek:
Posted: Tue Apr 07, 2009 10:46 pm
by dragon
Hubby originally thought it was a 1978 because he saw on one of the pamphlet that year in the corner. But after coming here and checking the serial number and color of the unit and motor information I found out it was 1962. Never trust a man!!!
I also have a parts list that comes from Magna with the belt number that is on my belt. Not the same part numbers as the ones listed on this site.
I will take my time to clean this unit. Still have to watch the videos that have been recommended to me but I'm on dialup so it takes a while to load.
I am positively very sure that nobody is in my area. I am from Chertsey, Quebec, Canada. That is 90 minutes north of Montreal.
Thank you very much to everybody for helping me out. My next step is watching the recommended videos and blowing out all the crud from the inside of the motor housing.
Will be back here after all that is done.
Diane
Posted: Tue Apr 07, 2009 11:18 pm
by beeg
Well I sure hope you will be back here more often than that. What are your plans on using the SS?
Posted: Tue Apr 07, 2009 11:24 pm
by dragon
I have been looking around for a lathe so this will be my primary use for the Shopsmith. When people would ask me what tool I owned the answer always was: I own everything but a lathe. That's how I got this unit. I have been reading on all the great things it does but mostly I wanted a lathe.
Diane
Posted: Tue Apr 07, 2009 11:33 pm
by SDSSmith
Diane - One other resource for you is All-In-One Wood Tools the Canadian Shopsmith rep. They have a website with tons of resources http://www.allinonewood.com/ such as their service advisor page http://63.243.136.77/?page=shop/serviceadvisor&
Posted: Tue Apr 07, 2009 11:46 pm
by dusty
dragon wrote:Had some time off this morning and took off the cover where the motor is located. Will take the unit out in the front next week and blow with the compressor to get some of the dust out. Took off the larger of the two belts and the motor turned. That made me very happy. The belt was hard to come off because it seemed to be jammed in there. Put it back and the whole thing now turns but the belt seems to be the wrong size. It rubs on both sides on the sheave. There is a number on it "Shopsmith 3052 DF". Cannot find this on the site. Found an instruction paper with this number from the "Magna" company in Cincinnati Ohio.
I will change both belts when I find out which ones are the right ones to order for this model.
The next step for me is to clean it and oil it properly. The whole thing is dry.
Thanks for your help.
Diane
Since you have the drive belt disconnected, I would suggest you drop the motor pan (let the motor and motor pan rest on the tubes) and put the Mark V in the verical mode to clean it.
You'll have to disconnect the power cord wires at the switch to do this.
WITH THE POWER CORD UNPLUGGED OF COURSE
I find it a lot easier to work on this way. I use a bungy cord to hold the headstock endcap up out of the way while in the vertical mode..
Posted: Tue Apr 07, 2009 11:46 pm
by JPG
dragon wrote: . . . But after coming here and checking the serial number and color of the unit and motor information I found out it was 1962. . . .
And WHAT color IS it?:)
Posted: Wed Apr 08, 2009 12:07 am
by beeg
dragon wrote: My next step is watching the recommended videos and blowing out all the crud from the inside of the motor housing.
Diane
There are DVD's out there that you can buy from SS or other sources.
BEFORE ya blow out the crud and dust out of the SS. Turn the motor on, that will help keep the dust from getting into it. JUST be CAREFUL with the air nozzle.
Posted: Wed Apr 08, 2009 8:10 am
by dragon
It is of a gold and rust two-tone coloring. I could post a picture of it if it makes it easier.
Yes I had the belt off because that was the problem and the reason the shaft wasn't turning. It seemed to be caught in there. After I took it off I started the motor and it turned nice while sending clouds of dust out...and when I put the belt back on the main part finally turned that I could use it. But will not use it until it is cleaned and oiled properly. Now that I know the motor is good why kill it by not treating it right.
just went to start watching a video and mine is the same color as the one he is cleaning up here
http://www.shopsmithacademy.com/SS_Arch ... rn_Pt2.htm
Diane