Page 1 of 1
Mark V switch
Posted: Sun Apr 29, 2012 8:04 pm
by wrmnfzy
While checking a problem on my power stock the wiring became dislodged from the switch. I have a white and blue with same female ends and a blk and white with the same type ends. I ckd my manuals and can't find which go where any suggestions. I do have photos, but I'm new and don't know if they can be attached. Any help would be appreciated.
Posted: Sun Apr 29, 2012 8:27 pm
by JPG
wrmnfzy wrote:While checking a problem on my power stock the wiring became dislodged from the switch. I have a white and blue with same female ends and a blk and white with the same type ends. I ckd my manuals and can't find which go where any suggestions. I do have photos, but I'm new and don't know if they can be attached. Any help would be appreciated.
They slipped off, and will slip back on.
a white on each terminal on one side.
A black at one terminal on the other side, and a blue on the remaining terminal on that other side.
Mark V switch
Posted: Sun Apr 29, 2012 10:37 pm
by wrmnfzy
Thanks, it worked.
Posted: Mon Apr 30, 2012 4:34 am
by robinson46176
wrmnfzy wrote:Thanks, it worked.
Now take an "after" picture and drop it in your Shopsmith file.
.
switch
Posted: Tue May 01, 2012 5:18 pm
by wrmnfzy
10-4, did that.