Shopsmith Forums

I'm posting this after reading this thread which referred to a few of my videos, plywood bench building and hide glue. My new bench involves all of these but I didn't want to mention it there and hijack the thread so here it is for your discussion in a thread of its own. Yes, it is almost all plywood.


Sketchup here:  http://sketchup.google.com/3dwarehouse/ ... 61873164a1

[ATTACH]18399[/ATTACH]
There are Lumberjocks posts about the bench and its three very different vices

here, here and here and a seven part construction blog that starts here.

I look forward to any comments you may have. Sorry, not SS made but certainly could be.

Paul M

Thanks for posting here Paul. I saw this on LJ and intend to make my own (Once I squirrel away the funds and materials.) Another fine example of craftsmanship from a master.

I hope mine will be half as good as yours.

Hi Paul...Gorgeous bench! Only problem I can see is the big hole in the top... :-)

Sorry...was too easy :-)
Geo

Beautiful!

I really like the vices.

rlkeeney wrote:Beautiful!

I really like the vices.

The vises are nice also.

Paul, can you post the rough dimensions of the wedge, and the upper and lower parallel guide for the leg vise?

Paul, just found the sketch up link on LJ blog site thanks.

That Sketchup was done by a friend who is much better at it than I am. It should give you everything you need. If there's anything I can help with, Just ask.

Thanks

Paul M

tenbears wrote:Paul, just found the sketch up link on LJ blog site thanks.

Maybe this address should be given anyway, I could not find the blog in question or the plan.
Could someone direct me ... ?
Thanks.

camerio wrote:Maybe this address should be given anyway, I could not find the blog in question or the plan.
Could someone direct me ... ?
Thanks.

Here is the link Outside the box workbench