Shopsmith Forums

I purchased my first ShopSmith in 1979 and I believe it came with plans for a wood gumball machine made from a 2x4 block 3 1/2 X 3 1/2 on a 1x6x5" base. It had a hole in the top where you could place a mason jar and a dowel coming out of the front of the 2x4 with a porcelain knob attached. Between the 2x4 & 1x6 there is a dowel pin & the dowel with the porcelain knob has a routed track. I need the measurements on the pin and routed track. I have one base left and have photo attached but do not want to tear up to get measurements.
Is it possible someone has these old plans?

Is this the Gumball Machine you are looking for?

Awesome, thanks!!

Not sure it's what the OP as asking for, but that works for me!

Thanks Joe.

I've got one in a magazine at home I'll try to remember to look for it.

I think this is what you want. It's from the Sept/Oct 1980 issue of Hands On!.
[ATTACH]18471[/ATTACH]

Here's one from Hand's On Magazine Sept/Oct 2000. I'd post a pic, but I can't right click with the iPad.

http://www.shopsmithhandson.com/archive ... roject.htm

Couldn't find mine glad others did.