Shopsmith Forums

I built a bracket to hold a brush to clean debris off the badsaw blade. I can use a nylon toothbrush, brass or stainless brush from HF or some other option. The toothbrush is readily available but probably wears quickly. Not a big deal since I built this so that I can easily remove it and put on another if needed. But what works best for the blade and rubber tires?

Brass brush. Get a couple. They work great.

A wire brush would do.





________________________________

http://www.sawblade.com

Steel type wire brush will be fine. Check this blog, hope this will help
http://bandsawblog.com/415/