We have a new bagel store in town and my wife loves them. I remembered an article for a bagel cutting guide. It was in Wood magazine issue 213. I finished it last week. I had to enlarge the area holding the bagels as the pattern was for a much smaller bagel than our new source. The woods used are maple and mahogany. Used a couple of coats of Minwax tung oil followed by a couple of coats of satin polyurethane. Want to thank those that suggested I not worry about dust nibs until rubbing the piece with steel-wool (after all coats of polyurethane were applied). After rubbing, a coat of wax was added.
[ATTACH]21771[/ATTACH]
[ATTACH]21772[/ATTACH]
It was a simple project, but it came out very nicely.
Bagel Cutting Guide finished
Moderator: admin
Bagel Cutting Guide finished
- Attachments
-
- IMG_0177 (600x449).jpg (119.82 KiB) Viewed 2359 times
-
- IMG_0179 (463x600).jpg (141.28 KiB) Viewed 2359 times
Sam in Northfield, MN
A day without beer......could have been better
Mark V 500 - S/N 100990, Mark V 510 - S/N missing, SS Band Saw, SS 6" Belt Sander, SS 4" Jointer, SS Scroll Saw, SS DC3300
A day without beer......could have been better
Mark V 500 - S/N 100990, Mark V 510 - S/N missing, SS Band Saw, SS 6" Belt Sander, SS 4" Jointer, SS Scroll Saw, SS DC3300
I love it - great gift idea! Thanks for the tip - I'll search out that backissue of Wood
'78 Mark V 500 #27995 (my Dad bought new)
'82 Mark V 500 #96309
Two '47 10E's (serial#4314+6149) - one a dedicated drill press and the other a lathe
Two 10E/ER in parts slowly being restored…#26822 and #????? (SS plate missing)
SPT's: Bandsaw, Belt Sander, Strip Sander, Jointer, Jigsaw, Biscuit Joiner
'82 Mark V 500 #96309
Two '47 10E's (serial#4314+6149) - one a dedicated drill press and the other a lathe
Two 10E/ER in parts slowly being restored…#26822 and #????? (SS plate missing)
SPT's: Bandsaw, Belt Sander, Strip Sander, Jointer, Jigsaw, Biscuit Joiner
I have never seen a bagel as small as the pattern in the magazine allows for, so you will want to see if it is typical of what your used to. (BTW, never use a preposition to end a sentence with:Ddgale wrote:I love it - great gift idea! Thanks for the tip - I'll search out that backissue of Wood
:D )Sam in Northfield, MN
A day without beer......could have been better
Mark V 500 - S/N 100990, Mark V 510 - S/N missing, SS Band Saw, SS 6" Belt Sander, SS 4" Jointer, SS Scroll Saw, SS DC3300
A day without beer......could have been better
Mark V 500 - S/N 100990, Mark V 510 - S/N missing, SS Band Saw, SS 6" Belt Sander, SS 4" Jointer, SS Scroll Saw, SS DC3300